Release Notes: Version E.10.37 Software

Software Fixes in Release E.06.xx through E.10.xx
Release E.10.25
IDM (PR_1000310201) — The Switch fails to de-authenticate an 802.1X client after a corrupted
configuration file is received from a RADIUS server.
Mini-GBIC (PR_1000308653) — On ProCurve Switch xl 16-port 10/100/1000 Module (J4907A), a
dual-personality port will stop working after a mini-GBIC is hot-swapped out.
RSTP (PR_1000309683) — Temporary routing or switching problems may occur after RSTP is
disabled.
Release E.10.25
Problems Resolved in Release E.10.25 (Never released)
Connection Rate Filter (PR_1000310834) — Memory leak found during ProCurve stress testing.
A user may see a switch reboot or halt if using the CRF traps and runs the switch for a sufficiently
long time between reboots.
Release E.10.26
Problems Resolved in Release E.10.26 (Never released)
■
SNMP Traps (PR_1000285195) — Switch does not save the option to disable a
“Link up/down” SNMP trap after a switch reboot.
Release E.10.27
Problems Resolved in Release E.10.27
■
■
■
■
■
Crash (PR_1000282359) — When searching the log for an extremely long string, the switch
may crash with a bus error similar to:
PPC Bus Error exception vector 0x300: Stack Frame=0x0c8c1a70 HW Addr=0x6a73616c
IP=0x007d3bc0 Task='mSess1' Task ID=0xc8c2920 fp: 0x6b61736a sp:0x0c8c1b30
lr:0x007d3b28.
LLDP (PR_1000310666) — The command "show LLDP" does not display information
learned from CDPv2 packets.
MSTP Enhancement (PR_1000317990) — Implemented new CLI commands, "span
legacy-mode" and "span legacy-path-cost".
RSTP (PR_1000307278) — Replacing an 802.1D bridge device with an end node (non-STP
device) on the same Switch port, can result in the RSTP Switch sending TCNs.
Web UI (PR_1000305944) — The Port Configuration screen display is blank due to a Java
error when using Windows Explorer 6.0.
53