Release Notes: Version E.10.37 Software

Software Fixes in Release E.06.xx through E.10.xx
Release E.09.29 (Beta Only)
■
■
Hang (PR_1000228888) — The Console becomes unresponsive (“hangs” or “freezes”)
when attempting to issue a configuration command, resulting in 802.1X and Web/MAC
Authentication functions in the Switch ceasing to operate.
MSTP (PR_1000229407) — The Switch loses the MSTP 'edge-port' configuration when
the user TFTPs the configuration file from a server.
Release E.09.29 (Beta Only)
Problems Resolved in Release E.09.29
■
■
■
■
■
■
■
Crash (PR_1000229656) — When RADIUS server is unavailable, the following message
appears:
Software Exception at exception.c:373 -- in 'tHttpd', task ID =
0x257dda8 -> Memory system error at 0x 24ea750 - memPartFree
Crash (PR_1000235856) — show tech' causes:
Software exception at dmaRx.c:868 -> ASSERT
Other (PR_1000221018) — Menu leaves proxy-ARP configured when IP routing is
disabled.
Other (PR_94943) — The Setup screen allows an illegal configuration (Proxy-ARP). Using
the “Setup” utility, you can toggle the Proxy-ARP entry (at the bottom of the screen) even
though IP routing is NOT enabled on the system.
Proxy ARP (PR_94943) — Setup screen allows illegal configuration (proxy-arp).
Proxy ARP (PR1000221018) — Menu leaves proxy-arp configured when routing is
disabled.
XRRP (PR_1000217922) — XRRP router in infinite-failback mode can sometimes give up
control of its IP address.
Release E.10.02
Problems Resolved in Release E.10.02
■
■
CLI (PR_1000223516) — CLI hang when performing command involving 802.1X, Web/
MAC authentication or port.
Config (PR_1000207697) — Loading a startup-config file fails when file declares a new
VLAN as a management VLAN.
46