Release Notes: Version E.10.37 Software

Software Fixes in Release E.06.xx through E.10.xx
Release E.09.22
■
■
■
■
■
■
■
■
■
■
Crash/LLDP (PR_1000217480) —The switch may crash with a Bus error specifying "Task
= mlldpCtrl".
Crash/SSH (PR_1000192010) —The switch may crash with a message similar to:
Software exception at exception.c:328 -- in 'tSsh0', task ID = 0x101c590.
Crash/Static Route (PR_1000217354) —The switch may crash with a Bus error in
mSnmpCtrl when adding a less-specific static route.
LLDP (PR_1000202129) — The command show lldp info remote does not provide correct
information.
LLDP/Mesh (PR_1000216041) — Switch does not issue an Event Log message if LLDP is
configured inconsistently among mesh neighbors.
MAC Authorization (PR_1000212868) — MAC Authorization ages out a client prematurely
when the client passes traffic in multiple VLANs.
Port Security (PR_1000210932) — Open VLAN mode (Unauthorized VLAN) does not
work correctly with any port-security learn-mode.
SSH (PR_1000207275) — The Codenomicon test tool causes memory leaks in SSH.
Virus Throttling (PR_1000213532) — The command show conn throttled-hosts displays
hosts on ports set to notify-only.
Web UI (PR_1000191635) — Port column may not be sorted correctly in all Web user
interface screens.
Release E.09.22
Problems Resolved in Release E.09.22
■
■
■
CLI (PR_1000223516) — CLI hangs when entering certain port commands such as those
involving Web MAC authentication or 802.1X.
MDI/MDI-X (PR_1000220687) — Switch does not report the state of MDI/MDI-X correctly
for ports on the J8161A PoE module.
RSTP (PR_99049) — Switch does not detect and block network topology loops on a single
port. For example, the port connects to a hub that has a loop or the port connects to an
inactive node via IBM 'Type 1' cable.
Release E.09.23 (Beta Only)
Problems Resolved in Release E.09.23
44