Release Notes: Version E.10.37 Software
Release Notes: Version E.10.37 Software
Release Notes: Version E.10.37 Software
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Software</strong> Fixes in <strong>Release</strong> E.06.xx through E.10.xx<br />
<strong>Release</strong> E.10.23<br />
■<br />
■<br />
■<br />
LLDP (PR_1000303500) — Missing LLDP-MED information when using command:<br />
"show lldp info remote-devices".<br />
Meshing (PR_1000300756) — Time delay in switch when reporting a mesh link being<br />
down.<br />
Web Authentication (PR_1000302945) — When a client fails authentication and is<br />
assigned to the Unauthorized VLAN, it cannot communicate with other clients on the<br />
Unauthorized VLAN.<br />
<strong>Release</strong> E.10.23<br />
Problems Resolved in <strong>Release</strong> E.10.23<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
CLI/DHCP (PR_1000286898) — Under some conditions, the CLI may freeze or lock up<br />
when the DHCP relay agent is configured.<br />
Crash (PR_1000307280) — Inconsistent or incorrect STP data may cause the switch to<br />
crash with a message similar to:<br />
<strong>Software</strong> exception at stp_mib.c:248 -- in 'mSnmpCtrl', task ID =<br />
0x12d14b8\n-> ASSERT: failed.<br />
IGMP (PR_1000301557) — Data-driven IGMP does not prevent flooding when no IP<br />
address exists on a VLAN.<br />
SNMP (PR_1000295753) — Removing 'public' SNMP community generates an empty<br />
Event Log message.<br />
IP Forwarding (PR_1000305739) — When a user attempts to configure 'ip forward-protocol<br />
netbios-dgm', the switch incorrectly configures 'ip forward-protocol netbios-ns' instead.<br />
RSTP (PR_1000306227) — RSTP TCNs cause high CPU utilization and slow software<br />
based routing.<br />
<strong>Release</strong> E.10.24<br />
Problems Resolved in <strong>Release</strong> E.10.24 (Never released)<br />
Config (PR_1000238543) — The "Named Source-Port Filter" command would accept names up to<br />
30 characters long, but the CLI could only display 20 characters. Name length limit is now changed<br />
to 20 characters.<br />
Enhancement (PR_1000292455) — Rate display for ports on CLI. See description under “<strong>Release</strong><br />
E.10.24 Enhancements” on page 12.<br />
52