Release Notes: Version E.10.37 Software

Software Fixes in Release E.06.xx through E.10.xx
Release E.10.33
■
■
■
■
DHCP Enhancement (PR_1000311957) — Added option to configure the switch to use
the management VLAN IP address in the Option 82 field for all DHCP requests received from
various VLANs. For details, see “DHCP Option 82: Using the Management VLAN IP Address
for the Remote ID” on page 14
Enhancement (PR_1000287679) — Fast Boot CLI & SNMP Implementation. For details
see “Using Fastboot To Reduce Boot Time” on page 14.
ICMP (PR_1000235905) — Switch does not send a 'destination unreachable' response
message when trying to access an invalid UDP port.
Menu (PR_1000318531) — When using the 'Menu' interface, the Switch hostname may be
displayed incorrectly.
Release E.10.33
Problems Resolved in Release E.10.33 (Never released)
■
■
■
Counters (PR_1000321097) — Drop counters are displaying incorrect information.
Counters (PR_1000321476) — SNMP counter may display incorrect information.
Enhancement (PR_1000330704) — Added RADIUS Command Authorization and
Accounting for the Command Line Interface.
Release E.10.34
Problems Resolved in Release E.10.34 (Not a general release)
■
■
SSHv2 (PR_1000320822) — The Switch does not generate SSHv2 keys and may crash with
a message similar to:
TLB Miss: Virtual Addr=0x00000000 IP=0x80593a30 Task='swInitTask' Task
ID=0x821ae330 fp:0x00000000 sp:0x821adfb8 ra:0x800803f0 sr:0x1000fc01.
Module Fault (PR_1000331147) — Switch modules J9001A (Switch xl Wireless EDGE
Services Module) and J8162A (Switch xl Access Controller Module) will fault if Fast Boot is
enabled and the log will report the following Major event:
"HPESP: Access Controller XL Module x: incompatible BIOS version".
Release E.10.35
Problems Resolved in Release E.10.35 (Not a general release)
55