Design Guide - Solvay Plastics
Design Guide - Solvay Plastics
Design Guide - Solvay Plastics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
UL 746A Properties of Amodel Resins<br />
Selected UL 746A properties for selected Amodel grades<br />
are shown in Table 38. The grades selected are the ones<br />
most often used for electrically insulating applications.<br />
UL Relative Thermal Indices<br />
The UL Relative Thermal Indices are the result of thermal<br />
aging tests and, therefore, appear in the Thermal<br />
Stability section on page 49.<br />
Table 38: UL 746A Property PLC for Amodel<br />
PPA Grades<br />
Grade mm (1) HWI HAI HVTR CTI<br />
A(AS)-1133 HS 0.80 0 0 4 0<br />
AT-6115 HS 0.80 0 (2) 0 1 0<br />
AT-6130 0.80 4 0 1 0<br />
AS-1566 HS 0.80 – 0 0 0<br />
A-1340 HS 0.80 0 (2) 0 1 1<br />
AS-4133 HS 0.80 0 (2) 0 1 0<br />
AFA-4133 V0 Z 0.75 0 0 1 1<br />
AFA-6133 V0 Z 0.75 0 0 1 1<br />
AFA-6145 V0 Z 0.75 0 1 – 1<br />
(1)<br />
Minimum thickness, mm<br />
(2)<br />
This value measured at 1.5 mm thickness<br />
Property Data<br />
Amodel ® PPA <strong>Design</strong> <strong>Guide</strong><br />
57
Change language