01.11.2012 Views

IFU for 840softwareenhancementsaddendumenglish - Covidien

IFU for 840softwareenhancementsaddendumenglish - Covidien

IFU for 840softwareenhancementsaddendumenglish - Covidien

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Operator’s Manual Addendum<br />

Alarm setup<br />

Touch the ALARM SETUP button to display the current alarm settings and change<br />

the alarm settings as needed. A low circuit pressure (3P PEAK) alarm is now available<br />

during NIV to detect potential circuit disconnects or large system leaks based upon<br />

pressure measurements in the patient circuit. Refer to Table 4 and Table 6 <strong>for</strong> more<br />

in<strong>for</strong>mation regarding this alarm. The 3P PEAK alarm may be turned OFF, if desired.<br />

Figure 9 shows the NIV alarm screen with new patient default settings.<br />

NIV<br />

indicator<br />

4P PEAK<br />

alarm limit<br />

Figure 9. New patient alarm settings<br />

34 10070808 Rev. C Software Enhancements

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!