USE3 Physiolab Software Guide - J&J Engineering Biofeedback ...

Physiolab Software Guide 2
If you already have the software installed and have created customized settings
and tasks, you will have to re-create these after upgrading. If you wish to save
customized settings and protocols, you must rename the application file name.
(For instructions, please see “NOTE” near the top of this page.)
To download the upgrade:
On the Tech Support webpage, click the heading called “Download (date) USE3
Physiolab Upgrade”. Click "Open".
Click “Next“ when prompted. Accept all default settings (including the “Repair”
selection).
Click “Finish”.
If you want to save the update to removable media for installation on a computer
not connected to the internet, click “Save” instead of “Open”. In the drop down
box, browse to your preferred save location. Accept the default file name and
click “Save”.
Contacting J+J Engineering Technical Support
Please visit J+J Engineering on the World Wide Web at www.jjengineering.com.
Here you can see the latest equipment, download software upgrades and view
technical support information.
Please feel free to contact J&J Engineering whenever you feel that you need
help. Also, if you would like to see something different in a program or have
product development ideas, we would appreciate your suggestions.
Phone: 1-360-779-3853
Fax: 1-360-697-4435
Email: techsupport@jjengineering.com
Send letters to J+J Engineering at:
J+J Engineering, Inc.
22797 Holgar Ct. NE
Poulsbo, WA98370