GENEVA - Vending Machines

COFFEtek Ltd
Card Actions
37. CARD ACTIONS provides access to a number of submenus, which relate to the operation
of the Geneva ranges optional smart card interface. The smart card interface provides the
capability for both audit and engineering configuration activities. In the event that the reader
is not fitted or an unreadable card is placed in the reader any attempt to enter this menu will
result in the message INSERT CARD being displayed. Pressing ESC will return to the main
menu. There are two types of card; one type is programmed to hold machine configuration
data and the other audit information. The cards are identical; the choice of functionality is
made by means of formatting. This must be carried out on a machine before a card can be
used. The submenus of CARD ACTIVITIES depend on the type of card inserted and its
contents as follows:
(a)
FORMAT CARD
Smart cards can be formatted for use as either an audit card or a preset (engineering
function) card. A card formatted using the MAKE AUDIT CARD function can only be
used to hold audit data and likewise a card formatted using the MAKE PRESET CARD
can only be used to hold data files as described in sections below.
Cards formatted as engineering/configuration cards may hold one file of each of the
following types:
MACHINE
CONFIG
PRICE
EVENTS
STRINGS
A file containing all of the data necessary to create an exact copy of
a machine set up, i.e. to effectively allow a machine to be ‘cloned’.
This includes drink parameters, general setting, serial number,
counters and timed events and prices.
A file containing all of the data necessary to create a copy of
machine’s operational parameters. This includes only the drink
parameters and general setting.
A file containing the drink details.
A file containing all programmed timed events.
A file containing all the editable text messages.
Cards formatted as AUDIT cards may only hold audit data. Audit data will be written to
the card when it is inserted into the reader if the METHOD OF AUDIT in the EVA DTS
CONFIG menu has been set to CARD.
(b) LOAD, SAVE & DELETE where is MACHINE,CONFIG,PRICE
or EVENTS
If a card contains a data file of a given type a LOAD & DELETE menu for that file type
will be available. If it does not then a SAVE menu to allow its creation will be available.
The machine should be switched off and on after loading files.
Cup Config
38. The CUP CONFIG menu allows the carousel from which the cup associated with a
particular selection is dispensed. Its submenus are only available if the carousel type has
been set to two types in the Carousel Config submenu of the Configure M/C menu.
If the carousel type is set to two sizes the larger cups are assumed to come from carousel 2,
see Fig 3.1 Paragraph 29(f).
77 06/08/2008 Issue 3 GENEVA