Owners Manual (GR-55_OM.pdf) - Roland
Owners Manual (GR-55_OM.pdf) - Roland
Owners Manual (GR-55_OM.pdf) - Roland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Editing the Tones (TONE)<br />
Parameter List (MODELING TONE)<br />
Group Parameter Value Description<br />
TONE<br />
PITCH<br />
12STR<br />
SWITCH OFF, ON Turns the tone on/off. Tones turned “OFF” will not sound (i.e., they are muted).<br />
If GUITARBASS is set to “GUITAR” (p. 9)<br />
E.GTR,<br />
AC,<br />
E.BASS,<br />
Selects the category (group) of tones.<br />
TONE CATEGORY<br />
SYNTH<br />
If GUITARBASS is set to “BASS” (p. 9)<br />
E.BASS,<br />
SYNTH,<br />
Selects the category (group) of tones.<br />
E.GTR<br />
TONE NUMBER 001–<br />
Selects the tone. For an explanation, refer to the following table (TONE CATEGORY:<br />
E.GTR–SYNTH).<br />
LEVEL 0–100 Adjusts the volume of the tone.<br />
STRING LEVEL1–6 0–100<br />
Adjusts the volume of each string.<br />
For the PCM1, PCM2, and MODELING tones, you can specify a value of “0” for each<br />
string that you don’t want to be sounded for that tone; this allows you to create “split”<br />
setups.<br />
PITCH SHIFT -24–+24 Adjusts the pitch of the tone (in semitone steps, +/-2 octaves).<br />
PITCH FINE -50–+50 Adjusts the pitch of the tone (in one cent steps; equivalent to 1/100 semitone).<br />
Turn this on if you want to produce the sound of a 12-string guitar. The sound of a<br />
12STR SW<br />
OFF/ON<br />
conventional 6-string guitar will be transformed to the sound of a 12-string guitar<br />
with its supplementary strings.<br />
DIRECT LEVEL 0–100 Specifies the volume of the main strings.<br />
SHIFT1–6 -24–+24<br />
FINE1–6 -50–+50<br />
Adjusts the pitch difference of each<br />
supplementary string relative to<br />
the corresponding main string, in<br />
semitone steps.<br />
Adjusts the pitch of each<br />
supplementary string in cents<br />
(1/100 semitone steps).<br />
* 12STR cannot be used with any of the following settings (the parameters will not be shown).<br />
• MODELING TONE parameters<br />
TONE CATEGORY=E.BASS (if set to GUITAR input) or E.GTR (if set to BASS input)<br />
PITCH SHIFT≠0<br />
PITCH FINE≠0<br />
• MASTER parameters<br />
ALTERNATE TUNING “SWITCH” =ON<br />
* On a conventional 12-string guitar,<br />
supplementary strings 1 and 2 are tuned<br />
to the same pitch (SHIFT = 0) as the corresponding<br />
main string, and supplementary<br />
strings 3–6 are tuned one octave higher<br />
(SHIFT = +12) than the corresponding<br />
main string. Slightly raising each string’s<br />
FINE setting will produce a more realistic<br />
12-string guitar tone.<br />
29
Change language