Versamark DS5600 Series - Kodak

Chapter 2. Operation
Controller Operation
The Production window has the following buttons and field groups:
Close
Ends the current activity for running the print job and returns you to
the Dashboard window.
Run
Starts printing a job. If necessary, any printers required are brought to
ready before printing begins. When printing is ready, the Run window
shows printing status in real time as the job runs.
Database status
Identifies the current database file for running the print job and
displays the print status of each record.
• A check indicates a record that has printed. You can use the check at
the top right to change the status of selected records.
• A flag indicates a record that has not printed yet. You can use the
check at the top right to change the status of selected records.
• An x indicates a record that has an error. You can use the check at
the top right to change the status of selected records.
Production mode
Allows you to select either of two modes for printing.
• Normal is used to print a job from the beginning or a midpoint.
• Remake is used to print a job’s error records after you’ve corrected
them. Check with the production supervisor for restrictions or special
procedures for reprinting documents.
Range
Allows you to select the records to be printed within a range of record
numbers. After entering a new number for the beginning or ending
record, or for both, you must select Change before the new numbers
can be used for printing.
Counters
Displays the numbers of records selected for printing (in gray),
already printed (in green), and unable to be printed (in red).
Search...
Allows you to search for text in the database. Online Help provides
more detail on the ability to control the search.
28 DS5600 Series Printing Systems