Versamark DS5600 Series - Kodak

Scope
This guide describes how to operate the Kodak Versamark DS5600 Series
Printing Systems. These printing systems produce letter-quality, variable
data images using continuous inkjet technology at up to 500 fpm
(150 mpm) with print resolutions of 240x240, 240x480, 300x300, or
300x600 dots per inch (dpi).
The DS5600 series printing systems can be used for business forms, tag
and label, direct mail, booklets, bar coding, numbering, addressing,
personalization, and billing statements with or without spot color. These
printing systems are modular and can be configured for web or sheet-fed
presses, collators, mail bases, folders, and a variety of other inline and
offline finishing equipment.
For DS5600 operation, the following system requirements apply to the
system components:
• Kodak Versamark CS150 System Controller Software Dashboard
Version 4.0.1.0 or higher
• Microsoft Windows XP Professional with Service Pack 2.0
• Ethernet-compatible narrow-format printers (with Compact DS Main
board installed)
• Ethernet-compatible wide-format print stations (with Compact DS
Main board installed)
• Fluid Controller Software Release 5.000 or higher
For additional information about the components used in the DS5600
series printing systems, see the following publications:
• Kodak Versamark CS150 System Controller Software Getting Started
Guide
• Kodak Versamark DP5222 and DP5340 Printing Systems Operator’s
Guide
The procedures in this guide should be performed only by an operator
who has received on-site training from Kodak.
Operator Guide 3