Versamark DS5600 Series - Kodak

More documents

Recommendations

Info

Chapter 2. Operation Controller Operation The Production window has the following buttons and field groups: Close Ends the current activity for running the print job and returns you to the Dashboard window. Run Starts printing a job. If necessary, any printers required are brought to ready before printing begins. When printing is ready, the Run window shows printing status in real time as the job runs. Database status Identifies the current database file for running the print job and displays the print status of each record. • A check indicates a record that has printed. You can use the check at the top right to change the status of selected records. • A flag indicates a record that has not printed yet. You can use the check at the top right to change the status of selected records. • An x indicates a record that has an error. You can use the check at the top right to change the status of selected records. Production mode Allows you to select either of two modes for printing. • Normal is used to print a job from the beginning or a midpoint. • Remake is used to print a job’s error records after you’ve corrected them. Check with the production supervisor for restrictions or special procedures for reprinting documents. Range Allows you to select the records to be printed within a range of record numbers. After entering a new number for the beginning or ending record, or for both, you must select Change before the new numbers can be used for printing. Counters Displays the numbers of records selected for printing (in gray), already printed (in green), and unable to be printed (in red). Search... Allows you to search for text in the database. Online Help provides more detail on the ability to control the search. 28 DS5600 Series Printing Systems
Chapter 2. Operation Controller Operation Export results Allows you to create a file that lists the records that are selected for printing, already printed, or unable to be printed, or any combination of these statuses. The file does not indicate more than the record numbers. Select Fields... Allows you to control which database fields are displayed in the Dashboard window. Product counter Allows you to set the number for the counter of the records printed from the job. See “Menus and Screens” on page 22 for descriptions of the remaining controls. For additional information on job printing, see the “Getting Started Tutorial” and the Help topic “Printing a job” in the CS150 online Help. For reference, see also: • CS150 Getting Started Guide • Kodak Versamark Font Tools Getting Started 2. Click on Run to print the job. The Run window appears and the job begins to print. Figure 2.11 Run window, CS150 Operator Guide 29
Page 1 and 2: Versamark DS5600 Series Printing Sy
Page 3 and 4: Scope This guide describes how to o
Page 5: Contents Chapter 1. Overview DS5600
Page 9: Tables Table 1.1 Printhead performa
Page 12 and 13: Chapter 1. Overview DS5600 Configur
Page 14 and 15: Chapter 1. Overview DS5600 Componen
Page 16 and 17: Chapter 1. Overview System Operatio
Page 18 and 19: Chapter 2. Operation System Prepara
Page 20 and 21: Chapter 2. Operation Startup Proced
Page 22 and 23: Chapter 2. Operation Controller Ope
Page 32 and 33: Chapter 2. Operation Print Station
Page 44 and 45: Chapter 3. Messages Message Display
Page 46 and 47: Chapter 3. Messages Message List In
Page 48: Chapter 4. Operator Maintenance Wee

Versamark DS5600 Series - Kodak

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?