Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 5: Setting up your TV<br />
Viewing the digital signal meter<br />
You can view the digital signal meter in the ANT digital TV<br />
input source only.<br />
To view the digital signal meter:<br />
1 Press Y and open the Setup menu.<br />
2 Highlight Installation and press T.<br />
3 A new set of Installation menu icons will appear, as shown<br />
below. Open the Terrestrial menu, highlight Signal<br />
Meter, and press T.<br />
Installation<br />
Terrestrial<br />
Input Configuration<br />
Channel Program<br />
Channel Add/Delete<br />
Signal Meter<br />
Viewing the system status<br />
To view the system status:<br />
1 Press Y and open the Setup menu.<br />
2 Highlight Installation and press T.<br />
3 A new set of Installation menu icons will appear, as shown<br />
below. Open the System Status menu, highlight<br />
System Information, and press T.<br />
Installation<br />
4 Press C c to scroll through the menu bar to select the<br />
Software Version and view the related information.<br />
System Information<br />
System Status<br />
System Information<br />
Software Version<br />
4 Press BbC c to select the antenna input and digital<br />
channel whose signal you want to check.<br />
Note: The physical digital channel number listed in the<br />
Signal Meter screen may not correspond to a virtual TV<br />
channel number. Contact your local broadcasters to<br />
obtain the RF channel numbers for your local digital<br />
stations.<br />
HL07<br />
3.2.21.0<br />
Nov 17 2006 - 01:52:20<br />
FW: 0B<br />
To close the screen and return to the Installation<br />
menu:<br />
Highlight Done and press T.<br />
Done<br />
Signal Meter<br />
Signal Locked<br />
0 Peak 0<br />
To return to normal viewing:<br />
Press O.<br />
Physical Digital Channel 4<br />
Virtual Digital Channel<br />
4-1<br />
Advanced Done<br />
To close the screen and return to the Terrestrial<br />
menu:<br />
Highlight Done and press T.<br />
To return to normal viewing:<br />
Press O.<br />
Reset Factory Defaults<br />
To reset all settings and channels to their factory<br />
default values:<br />
1 Press Y and open the Setup menu.<br />
2 Highlight Installation and press T. A new set of<br />
Installation menu icons will appear.<br />
3 Open the System Status menu, highlight System<br />
Information, and press T.<br />
4 Press C c to scroll through the menu bar to select<br />
Factory Defaults.<br />
System Information<br />
Factory Defaults<br />
This window provides the ability to reset the TV<br />
settings.Type in your PIN now (or "0000" if no<br />
PIN has been set) to restore settings to their<br />
factory default values.<br />
Done<br />
5 Enter your PIN code (or 0000 if no PIN code has been set).<br />
(continued)<br />
33