User's Manual - Xplova
User's Manual - Xplova
User's Manual - Xplova
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Changing Settings<br />
Table 2. General settings menu items<br />
Menu Item<br />
Altimeter<br />
Calibration<br />
Compass<br />
Calibration<br />
Factory Reset<br />
About<br />
Description<br />
Calibrate the barometric altimeter sensor. See<br />
“Altimeter Calibration” on page 58.<br />
Calibrate the compass sensor. See “Compass<br />
Calibration” on page 60.<br />
Allows for restoration of factory defaults. See “Press<br />
the Mode button to back to the General Settings.” on<br />
page 61.<br />
Displays hardware and software information. See<br />
“About” on page 63.<br />
Satellites<br />
If you are indoors or do not require the GPS receiver to be active you<br />
can turn it off from the general settings menu. You can also reset the<br />
receiver to drop all active GPS channels and reacquire GPS satellite<br />
signals. If the <strong>Xplova</strong> G3 is unable to fix your current position, it is<br />
recommended that you reset the GPS receiver.<br />
Note:If the <strong>Xplova</strong> G3 does not detect a GPS signal after five minutes,<br />
it prompts you to continue searching for GPS signals. Continue<br />
searching in background mode, or turn off the GPS receiver.<br />
Background search mode keeps the receiver actively searching<br />
for GPS signals but does not display the prompt.<br />
General Settings 53
Change language