3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

More documents

Recommendations

Info

INDIRECT Mounting THE MAXILLARY Cast Fig. 73 Articulator Face-Bow Transfer Model # Model # Assembly # 2240, 2340 9185 — 3040, 3140 9185 9188 8500 9195 9197 . Whip Mix indirect mounting face-bows combine the face-bow registration technique of the traditional QUICK MOUNT face-bow with the many advantages of indirect mounting. The indirect mounting procedure offers the user more access, increased stability, greater ease of use, and optimum instrument efficiency. Incorporating the indirect mounting technique does not require dramatic technique changes. The face-bow registration is taken on the patient utilizing the same technique as with the original Whip Mix QUICK MOUNT face-bow. Once the registration is obtained, the transfer assembly is removed from the face-bow and positioned onto the lower frame of the articulator. Fig. 74 Indirect mounting face-bow used with the QUICK MOUNT Magnetic System. Fig. 75 Whip Mix indirect mounting face-bows have been designed to be used with specific Whip Mix articulators as described in the chart. Additional transfer assemblies are available separately which allow the operator to mount one case and, with the aid of an additional transfer assembly, have the face-bow available for a second face-bow registration. Each transfer assembly includes: 1 - Face-Bow Fork (#8609) 1 - Vertical Rod with Horizontal Slide Bar, Toggles and “T” Screws 1 - Support Bar (#8686) 1 - Face-Bow Locking Screw (#8604) 28
Fig. 76 A A C C All Whip Mix QUICK MOUNT face-bows can be modified to have indirect mounting capability. The conversion package includes: B B A. Transfer Base Assembly (#9176Q, Figure 76 for the QUICK MOUNT magnet system) or (#1976A, Figure 77). B. Cross Bar (#8679) C. Transfer Assembly (see selection chart) Contains: • Locking Screw • Support Bar • Face-Bow Fork • Vertical Rod with Horizontal Slide Bar, Toggles and “T” Screws Fig. 77 A C B Fig. 78 Before using the indirect mounting face-bow, be sure the transfer assembly is oriented as pictured. Fig. 79 Disinfect the face-bow and take a face-bow registration of the patient in the usual manner. 29
Page 1 and 2: 3000 Series Articulator and Quick M
Page 3 and 4: CONTENTS INTRODUCTION 5 OBTAINING F
Page 5 and 6: INTRODUCTION WHIP MIX Articulators
Page 7 and 8: Fig. 5 Loosen the #8604 Thumb Screw
Page 9 and 10: Fig. 13 Inspect the registration fo
Page 11 and 12: Fig. 20 Tighten the center #8604 Th
Page 13 and 14: V. Obtaining Interocclusal Records
Page 15 and 16: Fig. 34 Remove and examine the cent
Page 17 and 18: Fig. 41 Manipulate the mandible int
Page 20 and 21: DIRECT Mounting THE MAXILLARY Cast
Page 22 and 23: Fig. 53 Note: Set each condylar gui
Page 24 and 25: Fig. 60 Hold the face-bow in one ha
Page 26 and 27: Fig. 68 The #28706 Face-Bow Fork Su
Page 30 and 31: I. Preparing The Face-Bow And Artic
Page 32 and 33: III. Mounting The Maxillary Cast Fi
Page 34 and 35: Fig. 97 Place the articulator upsid
Page 36 and 37: Setting The Condylar Guidance Of Th
Page 38 and 39: Fig. 112 Tighten the #2432 Clamp Kn
Page 40 and 41: SeTTING THE CONDYLAR GUIDANCE OF TH
Page 42 and 43: Fig. 127 To prevent possible wearin
Page 44 and 45: III. Preparing Face-Bow Armamentari
Page 46 and 47: VI. Preparing The Articulator For M
Page 48 and 49: VIII. Mounting The Mandibular Cast
Page 50 and 51: Fig. 159 Set condylar inclinations
Page 52 and 53: Interchangeability With The Model 3
Page 54 and 55: Maintenance The Whip Mix Model 3040
Page 56 and 57: Model 3140 Articulator # PART# QTY.
Page 58 and 59: model 9600 face-bow For Direct Moun
Page 60 and 61: MODELS 9275/ 9285/9295 FACE-BOWS FO
Page 62 and 63: NOTES _____________________________
Page 64: For additional information, contact

3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?