3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

More documents

Recommendations

Info

I. Preparing The Face-Bow And Articulator For Mounting Casts Fig. 80 Remove the face-bow from the patient. Next, unscrew the #8604 Locking Screw on the cross bar to release the transfer assembly which holds the bite registration from the face-bow. Fig. 81 Position the #8686 Support Bar onto the top of the transfer assembly and secure in place with the same #8604 Locking Screw. Remove the upper frame of the articulator from the lower frame and then remove the incisal guide pin. Fig. 82 Place the #9176Q Transfer Base Assembly for the QUICK MOUNT magnetic system on the articulator. Secure the Transfer Base Assembly to the magnet using a metal disc. You may want to use the #28706 QUICK MOUNT magnetic system face-bow fork support as described in Figure 68. Fig. 83 Note: All transfer base assemblies now have four holes. The extra set of holes allows the transfer base assemblies to be used on Hanau Wide Vue Articulators with the appropriate Whip Mix Adaptor. 30
II. Placing The Face-Bow Transfer Assembly On The Articulator Fig. 84 Insert the vertical rod of the transfer assembly into the transfer base and lower it until the bottom of the vertical rod contacts the transfer base. Fig. 85 Tighten the #9184 Clamp Screw so the vertical rod fits securely in the transfer base. The transfer assembly should be oriented on the articulator as pictured. Fig. 86 Place the upper frame of the articulator onto the lower frame, so the bottom of the metal boss now rests on the #8686 Support Bar. Fig. 87 Engage the #2415 Latch and #2425 Catch on the articulator to keep the condyles in contact with the posterior and superior walls of the condylar guides. 31
Page 1 and 2: 3000 Series Articulator and Quick M
Page 3 and 4: CONTENTS INTRODUCTION 5 OBTAINING F
Page 5 and 6: INTRODUCTION WHIP MIX Articulators
Page 7 and 8: Fig. 5 Loosen the #8604 Thumb Screw
Page 9 and 10: Fig. 13 Inspect the registration fo
Page 11 and 12: Fig. 20 Tighten the center #8604 Th
Page 13 and 14: V. Obtaining Interocclusal Records
Page 15 and 16: Fig. 34 Remove and examine the cent
Page 17 and 18: Fig. 41 Manipulate the mandible int
Page 20 and 21: DIRECT Mounting THE MAXILLARY Cast
Page 22 and 23: Fig. 53 Note: Set each condylar gui
Page 24 and 25: Fig. 60 Hold the face-bow in one ha
Page 26 and 27: Fig. 68 The #28706 Face-Bow Fork Su
Page 28 and 29: INDIRECT Mounting THE MAXILLARY Cas
Page 32 and 33: III. Mounting The Maxillary Cast Fi
Page 34 and 35: Fig. 97 Place the articulator upsid
Page 36 and 37: Setting The Condylar Guidance Of Th
Page 38 and 39: Fig. 112 Tighten the #2432 Clamp Kn
Page 40 and 41: SeTTING THE CONDYLAR GUIDANCE OF TH
Page 42 and 43: Fig. 127 To prevent possible wearin
Page 44 and 45: III. Preparing Face-Bow Armamentari
Page 46 and 47: VI. Preparing The Articulator For M
Page 48 and 49: VIII. Mounting The Mandibular Cast
Page 50 and 51: Fig. 159 Set condylar inclinations
Page 52 and 53: Interchangeability With The Model 3
Page 54 and 55: Maintenance The Whip Mix Model 3040
Page 56 and 57: Model 3140 Articulator # PART# QTY.
Page 58 and 59: model 9600 face-bow For Direct Moun
Page 60 and 61: MODELS 9275/ 9285/9295 FACE-BOWS FO
Page 62 and 63: NOTES _____________________________
Page 64: For additional information, contact

3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

Create successful ePaper yourself

Delete template?

Save as template?