3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

More documents

Recommendations

Info

Fig. 9 Place the elastomeric material uniformly over the top surface of the bite fork. Fig. 10 Inspect the underside of the bite fork to ensure material is locked onto the bite fork via the retention holes. Fig. 11 Position the bite fork so the mid-line of the bite fork aligns with the mid-line of the maxilla. Fig. 12 Support the bite fork underneath by having the patient bite on cotton rolls. Some clinicians prefer to have the patient bite on the bite fork itself after registration material has been placed on both sides. Whichever registration technique is used, the goal is to record a shallow registration of the maxillary cusp tips. 8
Fig. 13 Inspect the registration for any soft tissue or deep occlusal registrations. Soft tissue registrations and excess registration material may be easily cut away with a Bard-Parker ® Blade. Remember, it is only necessary to record the maxillary cusp tips! After trimming, place the registration back in the patient’s mouth and check for accuracy and stability. III. Positioning The Face-Bow On The Patient Fig. 14 Before attempting to place the face-bow onto the bite fork, it is suggested the operator rehearse the following procedure with the patient. Caution the patient that the plastic ear pieces in the auditory canal will greatly amplify noises during the procedure. Fig. 15 A finger cot placed over each ear piece will help facilitate proper disinfection of the face-bow. Remember, a rubber band correctly placed will aid face-bow manipulation! 9
Page 1 and 2: 3000 Series Articulator and Quick M
Page 3 and 4: CONTENTS INTRODUCTION 5 OBTAINING F
Page 5 and 6: INTRODUCTION WHIP MIX Articulators
Page 7: Fig. 5 Loosen the #8604 Thumb Screw
Page 11 and 12: Fig. 20 Tighten the center #8604 Th
Page 13 and 14: V. Obtaining Interocclusal Records
Page 15 and 16: Fig. 34 Remove and examine the cent
Page 17 and 18: Fig. 41 Manipulate the mandible int
Page 20 and 21: DIRECT Mounting THE MAXILLARY Cast
Page 22 and 23: Fig. 53 Note: Set each condylar gui
Page 24 and 25: Fig. 60 Hold the face-bow in one ha
Page 26 and 27: Fig. 68 The #28706 Face-Bow Fork Su
Page 28 and 29: INDIRECT Mounting THE MAXILLARY Cas
Page 30 and 31: I. Preparing The Face-Bow And Artic
Page 32 and 33: III. Mounting The Maxillary Cast Fi
Page 34 and 35: Fig. 97 Place the articulator upsid
Page 36 and 37: Setting The Condylar Guidance Of Th
Page 38 and 39: Fig. 112 Tighten the #2432 Clamp Kn
Page 40 and 41: SeTTING THE CONDYLAR GUIDANCE OF TH
Page 42 and 43: Fig. 127 To prevent possible wearin
Page 44 and 45: III. Preparing Face-Bow Armamentari
Page 46 and 47: VI. Preparing The Articulator For M
Page 48 and 49: VIII. Mounting The Mandibular Cast
Page 50 and 51: Fig. 159 Set condylar inclinations
Page 52 and 53: Interchangeability With The Model 3
Page 54 and 55: Maintenance The Whip Mix Model 3040
Page 56 and 57: Model 3140 Articulator # PART# QTY.
Page 58 and 59:
model 9600 face-bow For Direct Moun
Page 60 and 61:
MODELS 9275/ 9285/9295 FACE-BOWS FO
Page 62 and 63:
NOTES _____________________________
Page 64:
For additional information, contact
show all

3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?