3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

More documents

Recommendations

Info

OBTAINING FACE-BOW REGISTRATION Fig. 1 Items needed for a Face-Bow Registration: 1. Face-Bow with Nasion Relator Assembly and Face-Bow Fork (bite fork) 2. Compound or Wax Registration Material 3. Bard-Parker ® Blade or similar instrument I. Preparing Face-Bows Fig. 2 Clean and properly disinfect the plastic ear pieces before each use. If replacing them, make sure the hole on the flat side of each is above the side arm and the plastic is forced on until it touches the shoulder of the arm. Fig. 3 A rubber band may be easily positioned on the face-bow to aid in its manipulation. Note the caliper design of the QUICK MOUNT face-bow whereby the side arms move equal distances during the opening and closing motions. Fig. 4 Slide the #8605A Nasion Relator Assembly until it is centered on the #8608 Cross Bar of the face-bow. 6
Fig. 5 Loosen the #8604 Thumb Screw on top of the face-bow. If using the Whip Mix metal face-bow you will need to loosen the three thumb screws on top of the face-bow. Fig. 6 Loosen the #8640 T-Screw. Fig. 7 Loosen the #8643 T-Screw. II. Preparing The Face-Bow Fork Fig. 8 Make sure the bite fork has been properly sterilized. Low-heat impression compound, wax, or elastomeric are some of the materials which may be used as a bite registration medium for the bite fork. Elastomeric material is used in this demonstration due to its popularity. 7
Page 1 and 2: 3000 Series Articulator and Quick M
Page 3 and 4: CONTENTS INTRODUCTION 5 OBTAINING F
Page 5: INTRODUCTION WHIP MIX Articulators
Page 9 and 10: Fig. 13 Inspect the registration fo
Page 11 and 12: Fig. 20 Tighten the center #8604 Th
Page 13 and 14: V. Obtaining Interocclusal Records
Page 15 and 16: Fig. 34 Remove and examine the cent
Page 17 and 18: Fig. 41 Manipulate the mandible int
Page 20 and 21: DIRECT Mounting THE MAXILLARY Cast
Page 22 and 23: Fig. 53 Note: Set each condylar gui
Page 24 and 25: Fig. 60 Hold the face-bow in one ha
Page 26 and 27: Fig. 68 The #28706 Face-Bow Fork Su
Page 28 and 29: INDIRECT Mounting THE MAXILLARY Cas
Page 30 and 31: I. Preparing The Face-Bow And Artic
Page 32 and 33: III. Mounting The Maxillary Cast Fi
Page 34 and 35: Fig. 97 Place the articulator upsid
Page 36 and 37: Setting The Condylar Guidance Of Th
Page 38 and 39: Fig. 112 Tighten the #2432 Clamp Kn
Page 40 and 41: SeTTING THE CONDYLAR GUIDANCE OF TH
Page 42 and 43: Fig. 127 To prevent possible wearin
Page 44 and 45: III. Preparing Face-Bow Armamentari
Page 46 and 47: VI. Preparing The Articulator For M
Page 48 and 49: VIII. Mounting The Mandibular Cast
Page 50 and 51: Fig. 159 Set condylar inclinations
Page 52 and 53: Interchangeability With The Model 3
Page 54 and 55: Maintenance The Whip Mix Model 3040
Page 56 and 57:
Model 3140 Articulator # PART# QTY.
Page 58 and 59:
model 9600 face-bow For Direct Moun
Page 60 and 61:
MODELS 9275/ 9285/9295 FACE-BOWS FO
Page 62 and 63:
NOTES _____________________________
Page 64:
For additional information, contact
show all

3000 Series Articulator and Quick Mount Face-Bow ... - Whip Mix

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?