Valent_IOM_Controls - RJI-Sales.com

Max Master
Set Max Master to the largest known master device
MSTP Address on the network, with possible room
for expansion if needed.
Editable
Range: 0-127
Default: 127
Max Info Frames
Max Info Frames property controls how many
messages are sent before passing the token, and may
be increased up to 50 to increase performance in
some cases.
Editable
Range: 5-50
Default: 20
Lonworks
Neuron
The Neuron ID is a hardware address that will change
if the hardware changes. Each LonWorks device has
a unique 48 bit Neuron ID that was burnt into the
Neuron chip when it was manufactured, resulting in
approximately 300 trillion different combinations.
The Neuron ID is broadcast through the network
when a device is pinned so that a logical address
(Subnet/Node ID) can be assigned. The network
management tool must have the Neuron ID to
commission a device. The Neuron ID does not
contain information about the address of a device. A
device’s Neuron ID and Subnet/Node ID can be
found in the Identifiers tab of the device’s properties.
See also Subnet/Node ID.
View Only
Service Pin
The service pin generates a service-pin message that
contains the Neuron ID and the program code
identification of the node. A service-pin message is a
network message that is generated by a node
and broadcast on the network. It can be used to
commission the LONWORKS network. Set to True
to generate a service pin and the value will
automatically be reset back to False.
55. False (default)
56. True
Editable
Controls V2 IOM 44 May 2011
Part Number 474626