Instruction Manual

More documents

Recommendations

Info

Dynoware Type 2825A1-2 from the choices presented. The new language is loaded next time the application is started. 7.3 Shortcut Key Summary Key F1 Alt+D Alt+E Alt+H Alt+S Ctrl+Alt+S Ctrl+P Ctrl+L Ctrl+TAB Ctrl+SHIFT+TAB Right Mouse Drag on graph Right Mouse Double Click on graph Command Help View → Documentation Acquisition → Edit Acquisition → Hardware Acquisition → Start Select Language Print Report Report Layout (not documented) Cycle through Open Windows (forwards) Cycle through Open Windows (backwards) Zoom In on graph Zoom Out (if previously zoomed in) 7.4 Modifying the Report Logo If you want to modify the report print-out to have your companies logo perform the following steps: 1.) Use Notepad to Edit the "DynoWare_20.ini" file. Open the file C:\Windows\dynoware_20.ini (for Windows 95 or Windows 98) or C:\Winnt\dynoware_20.ini (for Windows NT or Windows 2000), respectively. 2.) Add the logo image file to Dynoware. In the [dynoware_20] section, add (or edit) the logo={drive:\path\file} command to add the image file you to appear on the report. In the example below, mylogo.bmp will appear on the report. Figure 7.2: Adding the report logo file Notes: The image file extension does not need to be entered. DynoWare will search for "bmp", "wmf", "pcx", "tif" and "jpg" image extensions automatically (and supports these types of images). The recommended image size is 362 (width) by 67 (height) pixels. Images will be scaled to fit Page 64 002-195Ae-06.02 (B19.2825Ae)
Appendix and centered in the logo area of the report. The default logo "prnlogo.bmp" that appears in the DynoWare directory can be used as an example logo. Copy the file and edit for the desired logo. 7.5 Example Files Filename Bohren LW 13.dwd Messdat2.dwd Swept_sine.dwd Frasen_15000rpm_2.dwd 5A-Fraesen_Aussen_2.dwd Description 1 channel Swept sine wave for filter experimentation 002-195Ae-06.02 (B19.2825Ae) Page 65
Page 1:
Instruction Manual Dynoware Type 28
Page 5 and 6:
Foreword This manual is written for
Page 7 and 8:
Content 6.2.1.1 A/D Board .........
Page 9 and 10:
Introduction 1. Introduction We tha
Page 11 and 12:
Introduction Kistler representative
Page 13 and 14:
Important Information 2. Important
Page 15 and 16:
Description of Dynoware 3. Descript
Page 17 and 18: Installing Software 4. Installing S
Page 19 and 20: Installing Software Warning: Make s
Page 21 and 22: Installing Software Note: Dynoware
Page 23 and 24: Installing Software 4.8 Important I
Page 25 and 26: Quick Start The File menu allows yo
Page 27 and 28: Reference 6. Reference This section
Page 29 and 30: Reference progress. An example of a
Page 31 and 32: Reference the installation director
Page 33 and 34: Reference the specific calculations
Page 35 and 36: Reference automatic control of Rese
Page 37 and 38: Reference 6.2.1.4.3.4 Type 2 The ty
Page 39 and 40: Reference Scale Sensitivity Filter
Page 41 and 42: Reference Reset/Operate Enable the
Page 43 and 44: Reference 6.2.1.8.2 RS-232C Setup (
Page 45 and 46: Reference On (Enable) Activates/Dea
Page 47 and 48: Reference Remove Remove the selecte
Page 49 and 50: Reference Figure 6.15: View Edit Se
Page 51 and 52: Reference Figure 6.17: Documentatio
Page 53 and 54: Reference 6.3.6 Zoom Out Zoom Out w
Page 55 and 56: Reference Cycle Documentation Setup
Page 57 and 58: Reference icon on the toolbar, data
Page 59 and 60: Reference 6.4.3 Smoothing on… Smo
Page 61 and 62: Reference Warning: Kistler measurem
Page 63 and 64: Reference The grid shows the channe
Page 65 and 66: Reference 6.7 Window... When a grap
Page 67: Appendix 7. Appendix 7.1 Graphs Man
Page 71: Appendix Signal drift compensation
show all

Instruction Manual

Create successful ePaper yourself

Delete template?

Save as template?