RAIDWatch User's Manual
RAIDWatch User's Manual
RAIDWatch User's Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RAIDWatch</strong> User’s <strong>Manual</strong><br />
5, Section 5.9: Multi-array Management was added. SCSI channel and<br />
compatible cables were explained clearer in Chapter 8.<br />
August 10, 2004<br />
April 20, 2004<br />
Revised for <strong>RAIDWatch</strong> revision 2.1. Added descriptions for new<br />
configuration options including the NPC utility for the Applet mode<br />
installation. Added Chapter 13: NPC Utility.<br />
Completely revised for <strong>RAIDWatch</strong> 2.0, but still kept the manual structure.<br />
Although software revision 2.0 has a brand new look and feel and a different<br />
configuration access, the available configuration options are basically the<br />
same. One chapter, Event Monitor, was removed because the functionality<br />
was combined with GUI screen interface. The chapter for NPC functionality<br />
was also removed because the event notifications were integrated with the<br />
Configuration Client utility.<br />
October 15, 2003<br />
Chapter 13 and Chapter 14 were merged into a single chapter, Chapter 13:<br />
Panel View. This chapter generally describes the panel view and removes<br />
the redundant descriptions that were previously in both Chapter 13 and<br />
Chapter 14. Part 4 of the previous edition was also removed and Chapter 13<br />
has been included in Part 3 of the <strong>Manual</strong>.<br />
September 29, 2003<br />
Figure 1-1 in Chapter 1 was changed to show a rackmount enclosure.<br />
Section 3-1 in Chapter 3 was divided into two sections: “Using Windows –<br />
<strong>RAIDWatch</strong> Installed as In-Band” and “Using Web Browser – <strong>RAIDWatch</strong><br />
Installed as Applet.” Section 3.5, “Rebooting the Controller,” was also<br />
added. Modifications to Table 14-1 were also made.<br />
August 28, 2003<br />
This manual was completely revised from previous editions. Previous<br />
editions came with six chapters and six appendices; the current revision has<br />
fourteen chapters divided into four parts and five appendices. The main<br />
changes to this edition are given below.<br />
Chapter 1 remained largely unchanged with only minor editorial corrections<br />
that do not directly affect the content.<br />
Chapter 2 was separated into two chapters. In the previous revision,<br />
Chapter 2, Installation, described system and platform requirements,<br />
installation, and different configuration options. This chapter was separated<br />
into Chapter 2 Installation, which describes the new <strong>RAIDWatch</strong> installer,<br />
and Chapter 3 Configuration Options in the new revision.<br />
xvi
Change language