RAIDWatch User's Manual

Chapter 4: Configuration Client Options
Figure 4-17: Agent List under Root Agent Setting
Right-click on the
Current Value
section
Figure 4-18: Agent List Right-click Menu
Step 3. Enter the IP address of the array you wish the Root Agent to
manage. Click OK to complete the process. An example is
shown in Figure 4-19.
4.3.3 Root Agent Log Settings
Figure 4-19: Adding RAID Agent IP
Following are the methods used to keep an administrator constantly
notified of the status of managed arrays. As shown in Figure 4-20, when
properly configured, the Root Agent Log allows an administrator to
receive event logs for all managed arrays for every preset time period.
To configure the Root Agent Log settings:
Step 1. Enable the function by double-clicking the Current Value field in
the Status field.
Root Agent Configuration 4-11