RAIDWatch User's Manual

Chapter 9: Drive Management
9.4.2 Partitioning a Logical Drive
WARNING!
Partitioning a configured array destroys the data already stored on it.
Step 1. Select the logical drive you want to partition. Move your cursor
to the Logical Drives window. Right-click to display the Edit
Partition command menu.
Figure 9-23: The Edit Partition Command
Step 2. Select Edit Partition from the menu.
Step 3. The Edit Partition window displays. Use the arrow keys on the
button on the lower right to switch between partitions.
Figure 9-24: The Edit Partition Command Window
Step 4. If the array has not been partitioned, all of its capacity appears as
one single partition. Single-click to select the partition (the color
bar).
Step 5. Right-click or select the Edit command to display the Add
Partition command. Click to proceed.
Step 6. The Partition Size window displays. Enter the desired capacity
and press OK to proceed.
Partitioning a Logical Configuration 9-25