RAIDWatch User's Manual

RAIDWatch User’s Manual
Step 4. Select the severity level of events to be sent to the receiver.
Step 5. Repeat this process to add more receivers.
Sender Side
From the Module Config window:
Step 1. Find the MSN settings from the pull-down list.
Step 2. Click on the On/Off switch beside the pull-down button to enable
MSN notification.
Switched ON
Switched OFF
Step 3. Double-click on the Current Value field of the Status row to
enable MSN notification. Set Status to Enable if you want the
module to be activated every time the Root Agent is started. Note
that the On/Off switch should also be in the On position before
you turn off the server or close the utility. Otherwise, you will
have to manually enable the function whenever you reboot your
server.
Step 4. Select the severity level of events to be sent to the receiver
station.
Step 5. Provide a valid MSN contact by entering the user name.
Step 6. Provide the associated password.
4.4.9 SMS Settings
SMS is a short for “Short Message Service.” Using this notification
method requires a GSM modem. RAIDWatch currently supports two
GSM modem models:
♦
♦
Siemens TC35
WAVECOM Fast Rack M1206
Please contact Infortrend for the complete list of compatible GSM
modems.
Receiver Side
To set a cell phone to receive notification messages:
4-24 Event Notification Settings