RAIDWatch User's Manual

RAIDWatch User’s Manual
appears on the right-hand side of the screen. An LD or LV that
has not been partitioned should have only one partition.
Step 5. Click on the Map LUN button to complete the process. (See
Figure 10-4)
Figure 10-4: LUN Map Setting Window: Single Partition
10.2.2. Map a Logical Drive or Volume Partition to a
Host LUN
Step 1. First, partition the logical drive or logical volume.
Step 2. Follow the steps listed in Section 10.1 above to access the LUN
Map Setting window shown in Figure 10-3.
Step 3. When the LUN Map window appears, select the appropriate
Channel, SCSI ID, and LUN numbers from the separate pulldown
lists above.
Step 4. Select a Logical Drive or Logical Volume with a single mouseclick.
With a single mouse-click on the Partition color bar, select
one of the partitions that you wish to associate with the selected
channel ID/LUN number. See Figure 10-5 for the configuration
screen.
Figure 10-5: Select Add New LUN to Host
Step 5. Click on the Map LUN button to complete the process.
10-4 LUN Mapping