Datalogic Heron Software Configuration Manual - The Barcode ...

More documents

Recommendations

Info

A HHD II CODE SELECTION (continued) DESCRIPTION STRING ISBN Conversion codes enable ISBN AP1 enable ISSN AP2 enable ISBN and ISSN AP3 disable ISBN and ISSN AP0 Code 39 disable Code 39 family AB0 Standard no check digit control AB11 check digit control and transmission AB12 check digit control without transmission AB13 Full ASCII no check digit control AB21 check digit control and transmission AB22 check digit control without transmission AB23 CIP 39 AB3 Code 32 AB4 code length AB*xxxx 2/5 disable Code 2/5 family AC0 Interleaved 2/5 no check digit control AC11xxxx check digit control and transmission AC12xxxx check digit control without transmission AC13xxxx Normal 2/5 5 bars no check digit control AC21xxxx check digit control and transmission AC22xxxx check digit control without transmission AC23xxxx Industrial 2/5 (IATA) no check digit control AC31xxxx check digit control and transmission AC32xxxx check digit control without transmission AC33xxxx Matrix 2/5 3 bars no check digit control AC41xxxx check digit control and transmission AC42xxxx check digit control without transmission AC43xxxx CIP/HR AC5 xxxx = ASCII numbers that define the code length where: • First 2 digits = minimum acceptable code length. • Second 2 digits = maximum acceptable code length. The minimum code length must always be less than or equal to the maximum. The maximum code lengths are 99 characters. Examples: 0132 = variable length from 1 to 32 digits in the code. 1010 = 10 digit code length only. 132
HOST CONFIGURATION STRINGS A CODE SELECTION (continued) DESCRIPTION STRING Codabar disable Codabar family AD0 Standard no start/stop character equality control AD111 nor transmission no start/stop character equality control AD112 but transmission start/stop character equality control AD121 but no transmission start/stop character equality control AD122 and transmission ABC Codabar no start/stop character equality control AD212 but transmission Codabar ABC forced concatenation AD232 code length AD*xxxx start/stop character case in lower case ADA0 transmission upper case ADA1 Code 128 disable Code 128 family AI0 enable Code 128 - control without transmission of check digit AI11 enable EAN 128 - control without transmission of check digit AI21 add GS before Code disable EQ0 enable EQ1 ISBT 128 enable ISBT 128 AI31 code length AILxxxx Code 93 disable Code 93 family AK0 enable Code 93 - control without transmission of check digit AK1 MSI disable the family AE0 no check AE1 MOD10 no tx AE2 MOD10 with tx AE3 MOD11-MOD10 no tx AE4 MOD11-MOD10 with tx AE5 MOD10-MOD10 no tx AE6 MOD10-MOD10 with tx AE7 xxxx = ASCII numbers that define the code length where: • First 2 digits = minimum acceptable code length. • Second 2 digits = maximum acceptable code length. The minimum code length must always be less than or equal to the maximum. The maximum code lengths are 99 characters. Examples: 0132 = variable length from 1 to 32 digits in the code. 1010 = 10 digit code length only. 133
Page 1:
HAND-HELD DEVICES II Software Confi
Page 4 and 5:
DATALOGIC S.p.A. Via Candini 2 4001
Page 6 and 7:
Num Lock...........................
Page 8 and 9:
4.4.1 Header/Terminator Selection .
Page 10 and 11:
Sending Configuration Strings from
Page 12 and 13:
1 HHD II 1.1 STATUS INDICATORS Seve
Page 14 and 15:
2 HHD II If the Host does not suppl
Page 16 and 17:
2 HHD II USB INTERFACE USB-KBD Ì$+
Page 18 and 19:
2 HHD II 2.1.3 Wedge Interface Sele
Page 20 and 21:
2 HHD II WEDGE INTERFACE (CONTINUED
Page 22 and 23:
3 HHD II 3 CONFIGURATION Once your
Page 24 and 25:
Enter Configuration Exit and Save C
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
RS232 PARAMETERS BAUD RATE PARIT
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
PEN EMULATION OPERATING MODE MIN
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
IBM 46XX IBM DATA FORMATTING 1. R
Page 52 and 53:
DATA FORMAT NOT FOR PEN INTERFACES
Page 54 and 55:
DATA FORMAT • AIM standard identi
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
READING PARAMETERS HAND-HELD OPERA
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
DECODING PARAMETERS INK SPREAD O
Page 76 and 77:
Page 78 and 79:
CODE SELECTION EAN/UPC FAMILY 2/
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93: Enter Configuration Exit and Save C
Page 98 and 99: ADVANCED FORMATTING CONCATENATION
Page 100 and 101: ADVANCED FORMATTING Exit and Save C
Page 102 and 103: ADVANCED FORMATTING ADVANCED FORMAT
Page 118 and 119: 4 HHD II 4.1.2 ACK/NACK Protocol Th
Page 120 and 121: 4 HHD II 4.2.4 Output and Idle Leve
Page 122 and 123: 4 HHD II 4.4 DATA FORMAT 4.4.1 Head
Page 124 and 125: Enter Configuration Ì$+;Î Exit an
Page 126 and 127: 4 HHD II 4.6 READING PARAMETERS 4.6
Page 128 and 129: 4 HHD II 4.6.7 Aiming System This p
Page 130 and 131: 4 HHD II 4.9 CONFIGURATION COPY COM
Page 132 and 133: 4 HHD II 4.11 FIRMWARE UPGRADES Dev
Page 134 and 135: A HHD II SERIAL CONFIGURATION STRIN
Page 136 and 137: A HHD II RS232 DESCRIPTION STRING B
Page 138 and 139: A HHD II IBM 46xx DESCRIPTION STRIN
Page 140 and 141: A HHD II READING PARAMETERS DESCRIP
Page 144 and 145: A HHD II CODE SELECTION (continued)
Page 146 and 147: B HHD II UPC A with 2 ADD ON ÌFGÎ
Page 148 and 149: B HHD II 138
Page 150 and 151: HEX AND NUMERIC TABLE C HEX / NUMER
show all

Datalogic Heron Software Configuration Manual - The Barcode ...

Create successful ePaper yourself

Delete template?

Save as template?