Notional Field Development Final Report - EBN

EBN Notional Field Development Plan
• Report the test progress to the Drilling Supervisor.
• Transmit all well test information to the EBN or designated office at the stipulated times.
• Ensure that all testing personnel have synchronized watches to the computer used for
programming the downhole memory gauges.
• Determine the flowrates (choke sizes) as per guidelines in the well test program.
• Make sure that all relevant data is collected and checked for validity and quality.
• Make sure that all samplings are carried out as per program.
• Monitor the perforation job to be sure that they are at the correct depth.
Reservoir Engineer - The Reservoir Engineer reports directly to the Drilling Supervisor on the rig and is
responsible for data quality control and analysis of the test data.
OIM and Toolpushers – Responsibilities include the following:
• Make sure that radio silence, flaring and wind directions are advised to the relevant parties.
• Stay informed as to changes in the well program.
• Ensure that the Driller is at ALL times on the rig floor, or at relief periods, the Toolpusher is on
the rig floor. Assistant Drillers will not be left alone on the rig floor.
Drillers- Responsibilities include the following:
• The Driller or Toolpusher will be on the floor at all times.
• All operations concerning the annulus and any operation of rig manifold valves.
• Monitoring of the annulus pressure at all times throughout the testing program.
• Driller must inform all key personnel immediately of any problems on the floor.
• The Driller will be in direct communication with the well testing personnel throughout the test
and he is responsible for maintaining a watch on the test equipment and flowlines on the drill
floor.
• Be aware of the location of all personnel during the test.
Well Test Supervisor - The Well Test Supervisor reports to the Test Engineer as the operator’s
representative with the following responsibilities:
• All operations of the test equipment.
• All actions during the test are conducted safely and as per program.
• Must inform the Test Engineer of any actions taking place with the well test equipment.
• Make sure that all his crew understands their duties and how the test will be conducted.
• Report any unusual occurrence IMMEDIATELY to Test Engineer.
• The Well Test Crew only will be responsible for operating the surface test tree at all times.
DST Specialists - The DST Specialist reports to the Test Engineer with the following responsibilities:
• Operations of the down-hole DST Equipment.
• Monitor annulus pressure at all times during the test.
© 2011 Halliburton All Rights Reserved
78