User Guide DS-100 Product(range) - Neopost
User Guide DS-100 Product(range) - Neopost
User Guide DS-100 Product(range) - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Tower Folder - curled forms stop<br />
Documents that are slightly curled may not feed properly, as the leading edge may become<br />
snagged at the infeed. To help overcome this, each hopper tray is fitted with a 2-position<br />
stop that can be raised or lowered.<br />
1. Withdraw the hopper and pull both of the spring-loaded knobs outwards.<br />
2. For flat forms or forms curling upwards, select the upper (default) position.<br />
3. For forms curling downwards, select the lower position.<br />
Pull both knobs<br />
out together<br />
Raise or lower<br />
moveable stop<br />
4. Ensure both knobs are properly located before replacing the tray.<br />
6.2 Loading the envelope hopper<br />
Slacken the lock- lever<br />
and adjust the side<br />
guides to give 1 - 2mm<br />
clearance across the<br />
width of the envelopes.<br />
Tighten the lock lever.<br />
Pull the weighted roller back and load the envelopes,<br />
ensuring they are fully down - flaps must be facing<br />
forwards. Release the weighted roller so that it ‘tips’ the<br />
envelopes into the pickup roller. An alternative heavier<br />
roller is also available (part no. C3656A) which can<br />
improve feeding of thick booklets. This must be fitted by<br />
an Authorised Service Engineer.<br />
34
Change language