FELCOM 16

1. OPERAT ONAL O ER EW
1.2 Terminal Unit (PC) Operation
All operations are carried out from the terminal unit (local supply), through an
easy-to-follow menu system. n this manual the PC is referred to as Terminal
Unit. Note that it is necessary to supply a printer.
PC requirements
• Operating system Windows98, Windows 2000, Windows ME,
P, or ista
• Memory At least 32 M
• Free space in hard disk At least 20 M
• CPU Pentium 100 M or higher
• Floppy disk drive
Windows is a registered trademark of Microsoft Corporation in the US and other
countries used under license.
1.2.1 Starting, quitting the application
For information about terminal unit operation see the PC’s owner’s manual.
1. Turn on the communications unit.
2. Turn on the terminal unit.
3. Double-click the F16PC icon to start the application. After the program has
been loaded the standby display appears. For details about the standby
display see paragraph 1.3.
F16PC icon
Note: The e ample screens shown in this manual may not match the
screens you see on your display. The screen you see depends on your
system configuration and equipment settings.
4. To quit the application, press the F12 key while pressing the Alt key. The
following display appears. ( ou may also quit the application by clicking the
Close button at the top right corner of the screen.)
OK to quit system
Yes
No
5. Press the key to choose es and then press the Enter key.
6. Turn off the terminal unit in accordance to Windows operating procedure.
7. Turn off the communications unit.
Note: f a different method is used to quit the application, any settings changed
before quitting will not be saved.
1-2