Dinamap Pro Series Operation Manual - Ardus Medical, Inc.

L Using the Menu System
Introduction
The PRO Monitor is equipped with a liquid crystal display
(25) and a rotor (21). Used together, these allow the
operator to view and edit most of the Monitor’s parameters
and functions. When the Monitor is in use, a number of
option buttons appear on the liquid crystal display (LCD).
The model of the Monitor determines which menu option
buttons appear on the LCD. The number of buttons and the
specific options depend on the menu level. The rotor
provides the means of choosing menu options and
changing monitor settings.
Liquid Crystal Display
The LCD is divided into three areas, each of which
distinct function.
has a
MENU AREA
AREA 3
Menu Area
This area displays the menu buttons that are available for
selection. Normal text in the menu area appears dark on a
light background, while the text of selected buttons appears
light on a dark background.
Area 2
This area displays BP and Sp02 data and error and warning
messages. The Display mode menu is used to select the
data to be displayed.
Area 3
This area displays the time, the time lapsed since the last
Auto BP determination (if in Auto BP mode), the battery
icon (if operating on battery power, the time and battery
icon toggle), and the BP and printer modes.
Note: In cold ambient temperatures (below 50 OF / 10” C),
updates on the LCD can be delayed by approximately 1
second. This delay on the LCD does not affect the
performance of the Monitor.