ADAM 4000 Series

Command Syntex
Command
Response
Syntex
#AA(cr) >(data0)(data1-
)(data2)(data3-
)(data4)(data5)
(cr)
data0 ~ 5:
snnnnnn
s : + or
-n : digit or dot
$AA0Ci(cr)i: 0 ~ 7
channel number
$AA1Ci(cr)i: 0 ~ 7
channel number
Command Description
Read Analog Input (for all 8
ch)When over range the (data
n) will
show>+999999(cr)When under
range the (data n) will show>-
999999(cr)When burn-out the
(data) will show>+888888(cr)
!AA(cr) Gain error calibrate of
assignment channel, User
have to input the external
standard source for calibrating
process
!AA(cr) Offset error calibrate of
assignment channel, User
have to input the external
standard source for calibrating
process
$AA2(cr) !AATTCCFF(cr) The command requests the
return of the configuration
data from the analog input
module at address AA
$AA5VV(cr)VV: 00 ~
FF each bit for each
channel
$AA6(cr) !AAVV(cr)
VV: 00 ~ FF
$AAF(cr) !AA(version)(cr)version
:
A1.0
Command
Example
Chapter 4
Command
response
Example
#03(cr) >+05.000-04.9-
00 +100.23-
089.32
+09.123
+123.45-09.13-
4(cr)(channel 5
be disable)
$050C7(cr) !05(cr)
$031C5(cr) !03(cr)
$062(cr) !06FF0600(cr)
!AA(cr) Channel enable/disable setting $03507(cr)ex.
07 mean
channel 0,1
and 2 is
enable and
others will
be disable
!03(cr)
Get the channel enable/
disable status
The command requests the
module at address AA to
return the version code of
module firmware
$036(cr) !0307(cr)
$03F(cr) !03A1.0(cr)
Chapter 4 Command Set 4-21