ADAM 4000 Series

ADAM-4051 Command Set Table
Chapter 4
Command Syntax Command Name Command Description Page No.
%AANNTTCCFF Configuration
#**
$AA2
$AA4
Synchronized
Sampling
Configuration
Status
Sets the address, baud rate, and/or
checksum status to a digital I/O module
Orders all digital I/O modules to sample
their input values and store them in special
registers
Returns the configuration parameters of a
specified digital I/O module
Returns the value of a specified digital I/O
Read
module that was stored in the specified
Synchronized Data
register after an #** command was issued
$AA5 Reset Status
$AA6 Digital Data In
$AAF
$AAM
Read Firmware
Version
Read Module
Name
Indicates whether a specified digital I/O
module was reset after the last time that
$AA5 command was issued
Returns the values of the digital I/O
channel in the addressed module
Return the firmware version code from the
specified digital I/O module
Return the module name from the specified
digital I/O module
Note: For command sets and further application, please link to
Advantech’s web site to download the latest ADAM-4000
user’s manual and Windows Utility.
1)Link to http://www.advantech.com
2)Click Support to get in eService Knowledge Center
3)Search for download and key-in “ADAM-4000” to get the latest
ADAM-4000 User’s Manual
4-152
4-158
4-161
4-159
4-163
4-154
4-165
4-166
Chapter 4 Command Set 4-27