SAP2000 SAP2000 Web Tutorial 1

Highlight -12 in the Y Location list box and click the Delete Grid Line button.
Highlight 12 in the Y Location list box and click the Delete Grid Line button.
Click the OK button.
16. Click the Quick Draw Frame Element button on the side toolbar (or select Quick
Draw Frame Element from the Frame menu).
17. Click on the grid line between points “F” and “G” in Figure C-10 to enter the last roof beam.
The model now appears as shown in Figure C-11.
Figure C-11: Model After All Roof Level Beams Have Been Drawn
18. Select all of the roof level frame elements and joints in the X-Y Plane @ Z=24 by
“windowing.” To do this:
• Click the Pointer button on the side toolbar to activate the Select Mode.
• Move the pointer above and to the left of the frame elements and joints.
• Click and hold the left mouse button.
• While holding, move the pointer below and to the right of the frame elements and joints.
A “rubber-band” window will show the region selected.
SAP2000 Web Tutorial 1 21