Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Note: Frame sections may be selected one at a time or they may be selected<br />
in groups as shown in this example. To select multiple frame sections that<br />
are next to each other, hold down the Shift key and click on the first and<br />
last frame element in the group. To select multiple frame sections that are<br />
not next to each other, hold down the Ctrl key and click each section you<br />
want to select, as is done here.<br />
À Use the Scroll buttons to locate the W21X44, W18X40, W18X35, W16X26,<br />
W14X132, W8X58 and W8X31 frame sections. While holding down the Ctrl key<br />
on the keyboard, click once on each section to highlight it and add it to the<br />
selection.<br />
À Click the OK button. This will display the I/Wide Flange Section dialog box<br />
which shows a schematic view of the last selected section (W8X31), section<br />
dimensions, and STEEL as the default material type.<br />
ä Click the OK button. This will close the I/Wide Flange Section dialog box and return<br />
to the Define Frame Sections dialog box. Notice that in the dialog box the labels of<br />
the selected frame elements are added to the default section name (FSEC1) in the<br />
Frame Section area.<br />
• Click on the Import drop-down box.<br />
• Click on Import Box/Tube. This will display a scrolling list box showing all the box/tube<br />
sections available in the data file.<br />
• In this dialog box:<br />
ä Use the Scroll buttons to locate the TS5X5X1/4 frame section. Click once on this<br />
section to highlight it.<br />
ä Use the Scroll buttons to locate the TS4X4X1/4 frame section. While holding down<br />
the Ctrl key on the keyboard, click once on this section to highlight it and add it to the<br />
selection.<br />
ä Click the OK button. This will display the Box/Tube Section dialog box that shows a<br />
schematic view of the last selected section (TS4X4X1/4), section dimensions, and<br />
STEEL as the default material type.<br />
• Click the OK button. This will close the Box/Tube Section dialog box and return to the<br />
Define Frame Sections dialog box. Notice that in the dialog box the labels of the selected<br />
frame elements are added to the previously defined frame sections.<br />
3. Click the OK button to close the Define Frame Sections dialog box.<br />
This completes the definition of frame sections.<br />
<strong>SAP2000</strong> <strong>Web</strong> <strong>Tutorial</strong> 1 33