Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...

Battery Powered Hydraulic 4 Ton
Crimp Tool for HD36 Dies
HDE36B Battery Powered Hydraulic Crimp Tool for HD36 Dies
The HDE36B Battery Powered Crimp
Tool offers the portability of a hand tool
with the stamina of a power tool! It is a
hand held, self-contained, 4 ton hydraulic
crimp tool that is actuated with a single
squeeze of the trigger.
This tool is designed to accept the
entire family of D36 dies for crimping
terminals, lugs or any other special
applications. WIRE RANGE: #8 to #0
AWG* in many power applications, and
.750 (19.05mm) in coaxial hexagonal
crimping.
The HDE36B offers a solution where
the volume of work exceeds the physical
limits of a worker with hand tools, and
hoses and cables are unwelcome or
unsafe for the environment where the
work is being performed.
The HDE36B battery tool is
approximately 13.25" long, 2.87" wide,
and 4.5" deep, weighs 2.8 lb with the
battery installed.
TOOL INCLUDES: Carrying Case, Two
18v Batteries (p/n HDE-LI-B), One Battery
Charger (p/n HDE-LI-120C).
Die Selection: The HD36 crimper
will accommodate all crimp dies listed
on page 109. Other applications may be
covered by this tool. Consult DMC for
details.
FEATURES
• Ergonomic design allows onehanded
operation
• Die automatically opens when
crimp is complete
• Die can be retracted in mid-cycle
to adjust connector
• Head rotates 350 degrees
• Red LED to display the current
status of the unit
CRIMP CAPACITIES
• Max. Crimp Force: 4 Tons
(35.6 kN)
• Avg. Crimp Time: 3 seconds
• Avg. Crimps per Charge: 100
SPECIFICATIONS
• Length: 13.25" (356 mm)
• Width: 2.87" (72.9 mm)
• Depth: 4.5" (114.3 mm)
• Weight (with battery): 2.8 lb
(1.3 kg)
• Sound Level: 75 db(A) at 1
meter
• Vibration: