Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HXE4-R<br />
The HXE4-R Remote Head Battery<br />
Powered Hydraulic Open Frame Crimp<br />
Tool is a portable, self-contained crimp<br />
tool. The lightweight crimp head is connected<br />
to the battery and pump unit by a<br />
hydraulic umbilical cable. This reduces the<br />
held weight to 2 pounds, about the same<br />
as the manual tool. The battery and pump<br />
unit can be worn by the operator on a<br />
tool belt, stored in a carrying case, or<br />
mounted to a bench top. It is equivalent<br />
to DMC’s HX4 hand tool and uses the<br />
same Y-dies. (See page 71 & 77).<br />
HXE4-R<br />
Adjustable Dies <strong>for</strong><br />
Insulated Terminals & Splices<br />
COLOR SIZE P/N<br />
Yellow 12-10 Y670<br />
Blue 16-14 Y671<br />
Red 22-18 Y672<br />
Yellow 26-24 Y678<br />
Red/Blue 22-14 Y1060<br />
Adjustable Crimping Dies accept terminations<br />
which con<strong>for</strong>m to AS7928, AS25036 (class 1 and<br />
2) and other military or commercial specifications.<br />
FEATURES<br />
• Ergonomic design allows<br />
one-handed operation<br />
• Die automatically opens<br />
when crimp is complete<br />
• Die can be pre-closed under<br />
spring pressure<br />
(thumb actuated release standard)<br />
• Connection point <strong>for</strong> tool<br />
balancing systems<br />
CRIMP CAPACITIES<br />
• #26 to #8 AWG<br />
(copper terminations)<br />
• Max Crimp Force:<br />
3500lb/15.6kN Max<br />
• Oil Pressure:<br />
4000psi/276 bar Max<br />
• Crimp Time: Approx. 3.5 seconds<br />
• Crimps per Charge: Approx. 250<br />
CRIMP TOOL<br />
• Length: 9.5”/241mm<br />
• Width: 2.5”/63.5mm<br />
• Depth: 2.5”/63.5mm<br />
• Weight: 1.64lb/.74kg<br />
• Hose Length: 4.5ft<br />
(permanently attached)<br />
Power Unit with<br />
Battery Installed<br />
• Length: 9.8”/248mm<br />
• Width: 3.1”/80mm<br />
• Depth: 5.6”/142mm<br />
• Weight: 4.3lb/2.0kg<br />
• Sound Level: 72dBA<br />
• Hydraulic Oil: 1.7oz/48g Shell Tellus<br />
T-15<br />
• Charging Voltage: 10.8 VDC Lithium<br />
Ion Type Battery<br />
• Charging Time:<br />
Approx. 40 minutes (Avg.)<br />
TOOL INCLUDES: Case, Gage, Die<br />
Removal Tool, Two Batteries (p/n<br />
HD-BATTERY-R), One Battery Charger (p/n<br />
HD-110CHARGER-R).<br />
Tool Belt, AC Adapter, and Bench Mount<br />
sold separately.<br />
Dies must be ordered separately.<br />
The battery and pump<br />
unit can be worn on a<br />
tool belt...<br />
(p/n 2063863-1)<br />
used with an AC<br />
adapter...<br />
(p/n HD-110AC)<br />
or mounted to a bench<br />
top. (p/n BM-7)<br />
© Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED. www.DMCTools.com<br />
PAGE 73