Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Electric/Hydraulic Open Frame Crimp Tool<br />
A Totally Self-<br />
Contained Portable<br />
Crimp System<br />
The EHCY is a fast cycling bench-top<br />
crimp tool designed to be lightweight<br />
and rugged. The versatile features of<br />
the EHCY make this a good choice<br />
where production and quality cannot<br />
be compromised.<br />
This unit is small in overall size<br />
(10.0" H x 7.1" W x 19.1" L) and weighs<br />
approximately 27 pounds, but has ample<br />
die <strong>for</strong>ce power to do most jobs. The<br />
crimp cycle time is only two seconds.<br />
Compatibility with Existing<br />
Crimp Dies<br />
The EHCY accommodates all<br />
M22520/5-XX military and Daniels “Y”<br />
series crimp dies. This af<strong>for</strong>ds total<br />
utilization of existing dies and total<br />
interchangeability with M22520/5-01<br />
(Daniels HX4) hand tool frames.<br />
Full Cycle Control<br />
Full crimp pressure is assured on every<br />
crimp. The internal cycle control network<br />
will not allow the tool to open until<br />
complete pressure is attained. The<br />
cycle is disabled when the Emergency<br />
Stop button is actuated.<br />
UNINSULATED TERMINALS MS20659<br />
AWG SIZE DIE P/N CRIMP HEIGHT INDENT GAGE<br />
#8-RED Y844HN 0.135" SGL G744<br />
#8-RED Y845HN 0.135" DBL G744<br />
#6-BLUE Y846HN 0.176" SGL G745<br />
#6-BLUE Y847HN 0.176" DBL G745<br />
Operator Safety Features<br />
The EHCY is equipped with a crimp<br />
cavity guard to remind users to keep<br />
fingers clear of the crimp dies.<br />
An Emergency Stop button is located<br />
on top of the tool. Depressing this<br />
button releases the hydraulic pressure<br />
and retracts the crimp dies to re-open.<br />
A Foot Pedal is Available (P/N EHCFP)<br />
When plugged to the crimp press, it<br />
disables the front panel actuator.<br />
INSULATED TERMINALS MS25036<br />
AWG SIZE<br />
DIE<br />
P/N<br />
CRIMP<br />
HEIGHT<br />
GAGE<br />
#8-RED Y673H 0.17" G682<br />
#6-BLUE Y674H 0.202" G683<br />
AWG SIZE<br />
0.202" Hex<br />
Crimp<br />
HEX DIES<br />
DIE<br />
P/N<br />
CRIMP<br />
HEIGHT<br />
GAGE<br />
Y870H 0.202" G724<br />
Adjustable Dies <strong>for</strong><br />
insulated Terminals & Splices<br />
COLOR SIZE P/N<br />
Yellow 12-10 Y670<br />
Blue 16-14 Y671<br />
Red 22-18 Y672<br />
Yellow 26-24 Y678<br />
Red/Blue 22-14 Y1060<br />
Adjustable Crimping Dies accept terminations<br />
which con<strong>for</strong>m to AS7928, AS25036 (class 1 and 2)<br />
and other military or commercial specifications.<br />
• Standard model (P/N EHCY) operates on 110 VAC power (power cord included).<br />
• Models available <strong>for</strong> other power and power cord requirements. Inquire with DMC <strong>for</strong> details.<br />
PAGE 76<br />
www.DMCTools.com © Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED.