Tooling Guide for Aerospace Wiring Systems - Interstate Connecting ...

MS20659-135 to -137, Sizes 1/0 to 4/0
Similar Terminal Shown
Type: Class 1 Uninsulated Terminals, Ring Tongue
Insulation: None
Terminal Body & Sleeve: Copper, ASTM B-152
Plating: Tin, ASTM B-545
Max Temp Rating: 175° C
Terminal Specs
Tool Selection Guide*
DMC Tool/Die Options
AWG
Wire Size
mm
Insulation
Diameter in. (mm)
Sleeve
Color
Terminal/Splice Part Number
HD485 Dies
MIL Approved*
HD51 Series
#1/0 42.4-60.6 N/A N/A MS20659- 135 HD485-01 Die HD51-123N Die
#2/0 60.6-76.3 N/A N/A MS20659- 136 HD485-02 Die HD51-124N Die
#4/0 96.3-117 N/A N/A MS20659- 137 HD485-04 Die --
* If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
AWG
Terminal Manufacturers’ Part Numbers
Terminal Specs Terminal Manufacturers’ Terminal #
Sleeve
Color
Terminal/Splice
Part Number
Burndy Hollingsworth Molex Panduit Thomas&Betts Tyco Elec
#1/0 N/A MS20659- 135 YAV25-L3 -- -- -- J975 --
#2/0 N/A MS20659- 136 YAV26-L3 -- -- -- K975 --
#4/0 N/A MS20659- 137 YAV28-L54 -- -- -- -- --
NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.
HD485
Tool options
HH80C Hand Tool, p. 114
TBHD1M Pneumatic Tool, p. 114
HD51 Tool series options
HD51 Hand Tool, p. 112
XHD51 Pneumatic Tool, p. 112
PAGE 150 www.DMCTools.com © Copyright 2010 Daniels Manufacturing Corp. ALL RIGHTS RESERVED.