LR-24 Electrofisher - Field Environmental Instruments

LR-24
BACKPACK ELECTROFISHER
Overview
LR-24 Controls and Features
Take the time to familiarize yourself with the LR-24's features before beginning electrofishing.
1 - Emergency Shutdown Switch
The main on/off switch for the LR-24. The
switch must be rotated 90 degrees clockwise
to prevent accidentally powering up the unit.
Simply pushing down will turn it off.
2 - Keypad
Allows the display and modification of
many control parameters of the LR-24.
3 - Menu Display
Displays settings and status of LR-24.
4 - Flashing Red Light
Flashes to indicate that the output is on.
5 - Battery Compartment Cover
Covers battery and connectors. Must be
properly in place and latched for unit to
function.
6 & 7 - Audio Alarms (Left, right)
Sounds to indicate that the unit is on.
8 - Packframe
Main connecting point for the harness
system. All components are mounted on
the packframe.
9 - Battery Compartment Latch
Three twist-lock latches secure the
battery cover to the main control box and
packframe.
10- Cathode Cable
a molded strain relief allows the cathode
cable to pass through slots in the battery
cover, either in side (as shown), or
bottom.
11- Anode Cable
A molded strain relief allows the anode
cable to pass through slots in the battery
cover, either in side (as shown), or
bottom.
6 2
3
4
9
5
10 11
LR-24 shown without harness system
12
12- Immersion Sensor
This sensor will shut the unit down, should the LR-
24 be immersed in water.
13- Serial Number
Unique number to identify the unit for service.
1
13
7 8
12
2 www.smith-root.com