LR-24 Electrofisher - Field Environmental Instruments
LR-24 Electrofisher - Field Environmental Instruments
LR-24 Electrofisher - Field Environmental Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>LR</strong>-<strong>24</strong><br />
BACKPACK ELECTROFISHER<br />
Overview<br />
The <strong>LR</strong>-<strong>24</strong> has many features that will increase the collection capabilities<br />
with greatly enhanced safety to both operators and wildlife.<br />
The <strong>LR</strong>-<strong>24</strong> has better output regulation and<br />
allows greater user control of the output than<br />
any electrofisher before. We suggest that you try<br />
quick set up first. You may find that you use less<br />
voltage and a lower frequency than with other<br />
electrofishers. This should lower fish injury<br />
rates and has the added benefit of longer<br />
shocking time per battery charge.<br />
In all cases, electrofishers should be set<br />
up by observing fish behavior and recovery times, not<br />
by voltage or current measurements.<br />
The <strong>LR</strong>-<strong>24</strong> remembers the settings that were last used and powers up with these settings. There are 10<br />
storage locations for different voltage, frequency and duty cycle set ups for use at any time. The set ups<br />
stored in these locations can be recalled quickly for use at different sites.<br />
A new pack suspension system allows for maximum flexibility and comfort.<br />
New and finer control over the output helps reduce injuries to fish.<br />
Power limit mode allows the user to set a maximum output power level that the <strong>LR</strong>-<strong>24</strong> will not exceed.<br />
Dual output mode lets the user set up 2 different waveforms and voltages and switch from the first to the<br />
second in less than a second by simply double “clicking” (pressing) the anode pole switch. The user can<br />
then switch back to the first waveform and voltage by releasing the anode pole switch for more than one<br />
second, then pressing it again.<br />
4 www.smith-root.com