SYNCRO_V_MANUAL_EN_R1_web - Digimerge

More documents

Recommendations

Info

Setting up RecordingStep 3 of 3: Start the recording service:• Click in the Recording Manager. Recording begins on all cameras according to therecording parameters. Cameras that are currently recording will be shown with a icon.Click to startrecording serviceNOTE: After changing recording parameters, you will need to restart the recording service.Click to stop the recording service, and then click to restart it.24
PlaybackPLAYBACKYou can playback recorded video saved to a local computer hard drive, NAS, or IP cameramicroSD/SD card. Or, you can download recorded video from an FTP server for playback.Record PlaybackThe Record Playback screen allows you to search for recorded video on a local computer harddrive, NAS, or IP camera microSD/SD card.To access the Record Playback Screen:• Click Playback > Record Playback.Searching for video using Local PlaybackUse the Local Playback option to search for video on your local computer hard drive or NAS.To search for video:1. Click Playback > Record Playback.2. Check cameras you want to search in theDevice List.3. Select Local Playback.Checkcameras tosearch4. Under Start Time, enter the starting timefor your search.5. Under End Time, enter the end time foryour search.6. Click Search. If video is available betweenthe selected time, it will appear on the right.NOTE: Local Search searches the locationsshown in the list. Directories configured asstorage locations should automaticallyappear in the list. To add additionaldirectories, see “Adding/removing searchdirectories for Local Search” on page 28.Select LocalPlaybackEnter Startand End TimeClick Search25
Page 1: Syncro-VClient Software for SyncroI
Page 7 and 8: Getting StartedGETTING STARTEDSyste
Page 9 and 10: Getting Started5. Under User Name a
Page 11 and 12: Getting Started8. Close all windows
Page 13 and 14: Using the System Interface8. Multi-
Page 15 and 16: Using the System InterfaceDisplay w
Page 17 and 18: Using the System InterfaceTo create
Page 19 and 20: Using the System InterfaceCycle Lis
Page 21 and 22: Setting up Recording5. Click Apply
Page 23 and 24: Setting up Recording4. Under Time Z
Page 25 and 26: Setting up Recording7. Check Use Al
Page 27 and 28: Setting up Recording3. Check the ca
Page 29: Setting up Recording4. Under Motion
Page 33 and 34: Playback5. Playback Controls :• :
Page 35 and 36: Playback2. Click the - button.Click
Page 37 and 38: Playback2. Click Query. The results
Page 39 and 40: BackupBackup menuThe Backup Menu al
Page 41 and 42: Alarm ManagerALARM MANAGERThe Alarm
Page 43 and 44: Device Manager (configuring cameras
Page 71 and 72: System ManagerSYSTEM MANAGERThe Sys
Page 73 and 74: System Manager• Image Format Auto
Page 75 and 76: System ManagerGroupAdd, modify, or
Page 77 and 78: System Manager• To change the use
Page 79 and 80: System ManagerTo delete user accoun
Page 81 and 82:
Configuring Camera Sensor SettingsC
Page 83 and 84:
Configuring Camera Sensor Settings
Page 85 and 86:
Configuring Camera Sensor SettingsA
Page 88:
Syncro-VEnglish Version 1.0www.digi
show all

SYNCRO_V_MANUAL_EN_R1_web - Digimerge

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?