Estella Pulse Generators - BIOTRONIK USA - News

Estella Pulse Generators Technical Manual 87The following clinical and technical events initiate a Home Monitoringmessage transmission:• Atrial Lead Check < 100+/-50 Ohm and > 2500+/-500 Ohm• Ventricular Lead Check < 100+/-50 Ohm and > 2500+/-500• VCC Disabled• ERI detected• Atrial Capture Control• High Ventricular rate• Atrial tachyarrhythmia persisting beyond a programmable time limitor• Mode Switch episode persisting beyond a programmable time limitNOTE:The attending physician must notify the BIOTRONIK Service Centerabout which of these events he/she wishes to be informed.7.17.5 Description of Transmitted DataThe following data are transmitted by the Home Monitoring system,when activated. In addition to the medical data, the serial number of theimplant is also transmitted.The Monitoring IntervalThe monitoring interval is considered the time period since the lastperiodic message was transmitted. In a periodic report, the monitoringinterval since the previous periodic report would be 24 hours.The following data are transmitted for the Cardio Report by the HomeMonitoring system, when activated. In addition to the medical data, theserial number of the implant is also transmitted.Device Status & Home Monitoring SettingsContaining device and message identifying values that pertain to theimplant and Home Monitoring:• Implantation Date• Device Status• Remaining capacity for ERI calculation (done by the Service Center)• Last Follow-up• Message Creation Date/Time• Device Serial Number