BoostAero XML and CSV Implementation Guideline ... - SupplyOn

Acceptance criteria- The supplier has ensured that the qualified EDI contact person has understood the M2MGuidelines and format specifications- The processing of all test cases with• mandatory and optional fields• and processing to the backend integration occurs without errors.- All relevant test case messages have been shown to SupplyOn as successfully processed(Screenshots of processed message in the ERP or log file)- The project phase has been finished in time8.2.1.3 Phase 3Inbound message testedTarget: Inbound messages must pass SupplyOn routing and syntax validation testing without errorWork packages: Duration 10 daysSupplyOn will provide the supplier sample test messages and instruction how to develop inboundmessage similar to the SupplyOn sample messages.Phase 2 (Outbound messages) and Phase 3 (Inbound messages) can be worked in parallelTest procedure- The supplier creates inbound response messages based on the SupplyOn Mapping Instructions- SupplyOn informs the supplier if the inbound message has syntax or routing errors- Additionally the routing and syntax error will be transmitted in a status notification via AS2connection to the supplier- The supplier has to correct the routing or the syntax error in the test messages- The adjustment has to correct within the agreed project time, and the supplier has to informSupplyOn about the solution date.Acceptance criteria- The supplier has ensured that the technical EDI contact person has understood the AirSupplyM2M Guidelines and format specifications.- The processing of the test cases with mandatory and optional fields have been processed withouterrors.8.2.1.4 Phase 4Solution verification testWork packages: Duration 5 DaysThe acceptance test is used to complete the message flow without any routing and syntax errors in themessages between SupplyOn and the supplier.Test procedure:Outbound messagesAfter receiving the test outbound messages the supplier has to inform SupplyOn Integration Contact- they have received the messages- the message can be mapped and processed- if mapping adjustments are necessaryThe supplier must communicate to SupplyOn if mapping adjustments are required and the solution dateInbound messages- The supplier creates inbound response messages based on the SupplyOn Mapping InstructionsPublic 34/59