BoostAero XML and CSV Implementation Guideline ... - SupplyOn

More documents

Recommendations

Info

Acceptance criteria- The supplier has ensured that the qualified EDI contact person has understood the M2MGuidelines and format specifications- The processing of all test cases with• mandatory and optional fields• and processing to the backend integration occurs without errors.- All relevant test case messages have been shown to SupplyOn as successfully processed(Screenshots of processed message in the ERP or log file)- The project phase has been finished in time8.2.1.3 Phase 3Inbound message testedTarget: Inbound messages must pass SupplyOn routing and syntax validation testing without errorWork packages: Duration 10 daysSupplyOn will provide the supplier sample test messages and instruction how to develop inboundmessage similar to the SupplyOn sample messages.Phase 2 (Outbound messages) and Phase 3 (Inbound messages) can be worked in parallelTest procedure- The supplier creates inbound response messages based on the SupplyOn Mapping Instructions- SupplyOn informs the supplier if the inbound message has syntax or routing errors- Additionally the routing and syntax error will be transmitted in a status notification via AS2connection to the supplier- The supplier has to correct the routing or the syntax error in the test messages- The adjustment has to correct within the agreed project time, and the supplier has to informSupplyOn about the solution date.Acceptance criteria- The supplier has ensured that the technical EDI contact person has understood the AirSupplyM2M Guidelines and format specifications.- The processing of the test cases with mandatory and optional fields have been processed withouterrors.8.2.1.4 Phase 4Solution verification testWork packages: Duration 5 DaysThe acceptance test is used to complete the message flow without any routing and syntax errors in themessages between SupplyOn and the supplier.Test procedure:Outbound messagesAfter receiving the test outbound messages the supplier has to inform SupplyOn Integration Contact- they have received the messages- the message can be mapped and processed- if mapping adjustments are necessaryThe supplier must communicate to SupplyOn if mapping adjustments are required and the solution dateInbound messages- The supplier creates inbound response messages based on the SupplyOn Mapping InstructionsPublic 34/59
- SupplyOn informs the supplier if the inbound message has syntax or routing errors- Additionally the routing and syntax error will be transmitted in a status notification via AS2connection to the supplierAcceptance criteriaThe supplier has ensured that the mapping process for the outbound and inbound messages works for alltest cases without error.8.2.1.5 Phase 5Setup AS2 technical connection and testing on Productive LandscapeWork packages: 15 daysAS2 connection will be set up on the production landscape. Transport all settings from test system toproductive system and setup message scheduler for productive system.Verify and exchange connectivity data for productive landscape.The procedure is similar to the Integration Landscape, but the AS2 technical setup specifications aredifferent. (See SupplyOn AirSupply AS2 data parameter sheet)Step 1 - The Supplier and SupplyOn will be exchange the connectivity data for an AS2 connection. Bothparties have to setup the technical AS2 partner, firewall settings and certificates. After the technical setupthe connection test can start.Step 2 - The supplier has to provide a screenshot or a logfile to SupplyOn after a successful AS2connection.Test procedure- SupplyOn sends to the supplier a couple of test connectivity messages to verify the technical AS2connection functions.- The supplier sends to SupplyOn a couple of test messages to verify the technical AS2 connectionto SupplyOn- The supplier verifies the AS2 Connection to/from SupplyOn is working.Acceptance criteriaThe validation is as follows- Two messages will be exchanged without errors from SupplyOn to the supplier- Two messages will be exchanged without errors from supplier to SupplyOn- The AS2 connection shows an SSL encryption- No firewall issues on message exchange- The certificate is from a approved institution8.2.1.6 Phase 6Migration will be organized and coordinated by Airbus.8.2.1.7 Phase 7Post Go-Live support- Check of message transfer- Handover to SupplyOn Operation TeamPublic 35/59
Page 1 and 2: IMPLEMENTATION GUIDE for suppliers
Page 3 and 4: 3.7 January 2014 5.5 Added informat
Page 5: Table of content1 Purpose of the do
Page 9 and 10: # Message Types(BoostAero XML /CSV)
Page 11 and 12: # Message Types(BoostAero XML /CSV)
Page 13 and 14: 4.1.2 Message Disposition Notificat
Page 15 and 16: SecurityTransport LayerAS2 Settings
Page 17 and 18: 4.1.5.3 Trusted Issuers (Certificat
Page 19 and 20: 4.1.5.4 AS2 via the CLEO LexiCom AS
Page 21 and 22: The Euro 350,-- implementation and
Page 24 and 25: Technical information and assistanc
Page 26 and 27: 6.4 CSV message format guidelinesTh
Page 28 and 29: 7.2 Error codes for specific messag
Page 30 and 31: MessageErrorCodeC437C438C439C008C44
Page 32 and 33: As soon as the technical AS2 connec
Page 36 and 37: 8.2.2 AcceptanceFor each phase ther
Page 38 and 39: 9.2.3 OverviewThe message scheduler
Page 40 and 41: # Name Description14 Column Frequen
Page 42 and 43: 9.2.4 Message Scheduler Details - 1
Page 44 and 45: # Name Description4 Dropdown Order
Page 46 and 47: Type Status Meaning/RemarkREJECTEDW
Page 48 and 49: OPENUser Group Action New Status Im
Page 52 and 53: # Description3 Information Text Thi
Page 56 and 57: 9.3 Message MonitorThe user can ent
Page 58 and 59: # Name Description12 Column Informa

BoostAero XML and CSV Implementation Guideline ... - SupplyOn

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?