configuration and options guide - IBM Quicklinks

xSeries 306 Memory OptionsSBBNumberOptionNumberMemory Description 1, 274P5096 06P4053 256MB PC2700 ECC DDR DIMM74P5097 06P4054 512MB PC2700 ECC DDR DIMM74P5098 06P4055 1GB PC2700 ECC DDR DIMM74P5112 06P4049 256MB PC3200 ECC DDR DIMM74P5113 06P4050 512MB PC3200 ECC DDR DIMM74P5114 06P4051 1GB PC3200 ECC DDR DIMMNote: All DIMM options are unbuffered DIMMs.1. A maximum of 4GB of memory is supported via 4 DIMM slots.2. A single DIMM configuration is valid if installed in socket DIMM 1. Otherwise,DIMMs must be configured in matched pairs starting with DIMMsockets 1 and 3, then 2 and 4. Single DIMM models require the standardDIMM either be matched or removed, before adding additional memory inpairs. PC2700 and PC3200 DIMMs can coexist in the same system if the memoryconfiguration/installation rules are followed (i.e., matched pairs). However,all memory will operate at the lowest installed speed.Model1Mx, 1Sx, 2Mx, 2Sx3MY, 3SY, 4MY, 4SYStd. DIMM Configuration1 x 512MB PC2700 ECC DDR DIMM1 x 512MB PC3200 ECC DDR DIMMPCI-X Riser Card ConnectorDIMM1 .. DIMM4106 Configuration and Options Guide