configuration and options guide - IBM Quicklinks

More documents

Recommendations

Info

1. xSeries 445 models ship with two 1200w hot-swap power supplies with two 2.8m/9ft IEC 320-C13 to IEC 320-C14 power cables for intrarackpower distribution. Models shipped in the US also include two 2.8m/9ft IEC 320-C13 to NEMA 6-15P power cords for attachment to high voltagepower sources.2. Power supply redundancy is standard for all configurations with a high voltage power source. If a low voltage source is used, power suppliesoperate at 600w on 1200w models. This limits full redundancy to configurations with two processors. Low voltage is not supported for 16-wayinstallations.3. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.4. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.5. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.6. xSeries 445 uses an SVGA controller (ATI Rage XL) with 8MB of video memory. Optional video adapters are not supported. Sixteen-way configurationssupport console connections only through the primary chassis.7. Includes a 17in Flat Panel Monitor.8. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).9. Includes a 15in Flat Panel Monitor.SBB Number Option Number Description- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1636 250mm KVM Conversion Option- 32P1652 1.5m KVM Conversion OptionRack and NetBAY 1, 2Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supporteddevices.- 73P5832 USB Conversion Option (four-pack) 4- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 6, 7Console Connectivity 2, 3Keyboard and Mouse 502R3206 31P7415 Preferred Pro Full-size Keyboard - 104 Keys, business black 802R3421 28L3673 Sleek 2-Button Mouse, business black1. xSeries 445 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.2. Sixteen-way configurations support console connections only through the primary chassis.3. Refer to the Rack Console Options section for information regarding console connectivity using these options.4. Required to connect one of the USB ports on the server to either a Local or Remote Console Manager. This option kit contains four 1.5 USBconversion option cables, four 14in lengths of Cat5 cable, four large curly-lock cable connectors and an eight-pack of velcro strips.5. xSeries 445 supports rack configurations only and ships without a keyboard or mouse. The system includes three USB ports (one on the frontof the chassis), SVGA video port, mouse port and keyboard port. USB ports are not active on the secondary server in 16-way configurations.6. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position, or NetBAY2U Flat Panel MonitorConsole Kit. Standard with 2U NetBAY console kits.7. Advanced TrackPoint IV features are not available on IBM xSeries systems.8. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.180 Configuration and Options Guide
Refer to the Important Notices section for important noticesxSeries 445 Tape OptionsSBBNumberOptionNumberTape DrivesBaysSupported 1Storage Interface Form Factor Ext TapeEnclosures 171P9187 59P6745 80/160GB DLT VS160 SCSI TapeDrive- Ultra160 (16-bit) 133mm (5.25in) HH 0034B0X49P3225 00N8016 100/200GB LTO Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B1X24P7303 59P6736 160/320GB SDLT Tape Drive - Ultra2 (16-bit) 133mm (5.25in) FH 3503B1X0034B1X71P9165 59P6744 200/400GB LTO Full-High TapeDrive- Ultra2 (16-bit) 133mm (5.25in) FH 0034B0X3503B1XTape Autoloaders- 36232LX 200/400GB 2U LTO Generation 2Tape Autoloader 3623 Model 2LX- 360716X 3607 Series 1760G/3.5TB SDLTproTape Autoloader- 360726X 3607 Series 1.6TB/3.2TB LTO TapeAutoloader;- Ultra160 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- Ultra2 (16-bit) 2U Rack -- 18P9133 TotalStorage Ultrium LVD TapeDrive 3580 Model L23- Ultra160 (16-bit) Stand-alone or5U Rack 2-- 4560SLX SDLT/LTO Modular Tape Library - Ultra2 (16-bit) 5U Rack -External Tape Enclosures- 0034B0X NetBAY Tape Enclosure (RackMount) 3- Ultra2 (16-bit) 4U Rack -- 3503B1X Full-High SCSI Tape Enclosure 4- Ultra2 (16-bit) Desktop or3U Rack-- 3510020 External Half High SCSI StorageEnclosure 3, 5- LVD (16-bit) Desktop -- 45591UX NetBay 1U xSeries Tape Enclosure - Ultra160 (16-bit) 1U RackExternal Tape Libraries- 18P9212 TotalStorage Ultrium LVD Tape- Ultra160 (16-bit) Stand-alone orLibrary 3582 Model L23 3 4U Rack 6-- 18P9337 TotalStorage Ultrium Fibre TapeLibrary 3582 Model F23 3 - 2Gb Fibre Channel Stand-alone or4U Rack 6 -Associated Options- 00N7956 68-pin External MultimodeLVD/SE SCSI Terminator- LVD/SE (16-bit) External 3510020Note: Additional tape drive and tape library attributes, requirements and options can be found in the Tape Drive Attributes and TapeLibrary Attributes appendices, respectively.1. xSeries 445 does not support internal tape drives. An external tape library or internal tape drive with a tape enclosure, can be connected to theUltra320 0.8mm VHDCI external SCSI connector. Select tape drive and enclosure, then use Appendix D: Cables - Storage Units - Controllers to selectan appropriate external cable.2. Rack mount requires an optional rack kit. See tape drive appendix for more information.3. External cables are not included.4. An external cable is included. Requires a fixed shelf if installed in a rack (allow an additional 1U in rack for fixed shelf).5. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).6. Rack mount kit is standard. Stand-alone kit is optional. See tape drive appendix for more information and options.Chapter 20. xSeries 445 181
Page 2 and 3:
Major updates in this issueAdded xS
Page 5 and 6:
Information SourcesInformation Sour
Page 7 and 8:
Server Product PositioningIncreased
Page 9 and 10:
xSeries Selection GuideThis table p
Page 11:
Refer to the Important Notices sect
Page 14 and 15:
12 Configuration and Options Guide
Page 16 and 17:
1. A single DIMM configuration is v
Page 18 and 19:
IntelliStation M Pro 6220 Power and
Page 20 and 21:
5. Describes the storage controller
Page 22 and 23:
M Pro 6230 front viewIntelliStation
Page 24 and 25:
IntelliStation M Pro 6230 Power and
Page 26 and 27:
Page 28 and 29:
IntelliStation Z Pro 6221 Processor
Page 30 and 31:
Bay 1Bay 2Bay 3Bay 6Bay 5Bay 4Z Pro
Page 32 and 33:
IntelliStation Z Pro 6221 Tape Opti
Page 34 and 35:
Intellistation Z Pro 6223 Processor
Page 36 and 37:
Intellistation Z Pro 6223 Hard Disk
Page 38 and 39:
Power cordMouseKeyboardParallelSeri
Page 40 and 41:
Intellistation Z Pro 6223 Tape Opti
Page 42 and 43:
2. One additional processor may be
Page 44 and 45:
Bay 1Bay 2Bay 3Bay 6Bay 5Bay 4A Pro
Page 46 and 47:
SBBNumberOptionNumberDescriptionRac
Page 48 and 49:
Page 50 and 51:
8. Intel Celeron processor with 400
Page 52 and 53:
4. The xSeries 206 IDE controller s
Page 54 and 55:
Slot 1: Bus 03, 66MHz, 64-bit, full
Page 56 and 57:
xSeries 206 Tape OptionsSBBNumberOp
Page 58 and 59:
xSeries 225 Memory Options1. One ad
Page 60 and 61:
5. Audio not supported for DVD-ROM
Page 62 and 63:
xSeries 225 I/O OptionsSBBNumberOpt
Page 64 and 65:
xSeries 225 Power and AccessoriesPa
Page 66 and 67:
Page 68 and 69:
xSeries 226 Processor OptionsSBB Nu
Page 70 and 71:
xSeries 226 Hard Disk Drive (HDD) a
Page 72 and 73:
xSeries 226 I/O OptionsPower cordMo
Page 74 and 75:
xSeries 226 Power and AccessoriesOp
Page 76 and 77:
xSeries 226 Tape OptionsSBB NumberO
Page 78 and 79:
xSeries 235 Processor OptionsSBBNum
Page 80 and 81:
6. Audio and video are not supporte
Page 82 and 83:
1. A 64-bit adapter installed into
Page 84 and 85:
SBBNumberOptionNumberDescriptionCon
Page 86 and 87:
Page 88 and 89:
1. One additional processor may be
Page 90 and 91:
Page 92 and 93:
xSeries 236 I/O OptionsSBB NumberOp
Page 94 and 95:
xSeries 236 Power and AccessoriesOp
Page 96 and 97:
xSeries 236 Tape OptionsSBB NumberO
Page 98 and 99:
frontCPU1 CPU2CPU4 CPU3rearTop view
Page 100 and 101:
xSeries 255 Hard Disk Drive (HDD) S
Page 102 and 103:
xSeries 255 I/O OptionsSBBNumberOpt
Page 104 and 105:
xSeries 255 Power and AccessoriesSB
Page 106 and 107:
Page 108 and 109:
xSeries 306 Memory OptionsSBBNumber
Page 110 and 111:
USB connectorsBAY 1 BAY 2BAY 3 BAY
Page 112 and 113:
SBBNumberOptionNumberDescriptionRac
Page 114 and 115:
Page 116 and 117:
xSeries 335 Memory Options1. One ad
Page 118 and 119:
2. x335 supports IDE and hot-swap m
Page 120 and 121:
3. If a RAID controller is installe
Page 122 and 123:
Page 124 and 125:
xSeries 336 Processor OptionsSBB Nu
Page 126 and 127:
Page 128 and 129:
xSeries 336 I/O OptionsSBB NumberOp
Page 130 and 131:
SBB NumberOptionNumberDescriptionRa
Page 132 and 133: 130 Configuration and Options Guide
Page 134 and 135: ModelStd. DIMM Configuration8827-14
Page 136 and 137: slot 3 slot 6slot 2slot 1slotslotSl
Page 138 and 139: xSeries 345 Processor OptionsSBBNum
Page 140 and 141: Bay Form Factor Height Front Access
Page 142 and 143: 4. Cable option 02R2068 is required
Page 144 and 145: SBB Number Option Number Descriptio
Page 148 and 149: xSeries 346 Processor OptionsSBB Nu
Page 150 and 151: xSeries 346 Hard Disk Drive (HDD) a
Page 152 and 153: TX/RXLINKTX/RXLINK5. The Integrated
Page 154 and 155: xSeries 346 Tape OptionsSBBNumberOp
Page 156 and 157: xSeries 365 processor boardxSeries
Page 158 and 159: 16-DIMM memory cardxSeries 365 Inte
Page 160 and 161: xSeries 365 front viewxSeries 365 I
Page 162 and 163: xSeries 365 Power and AccessoriesSB
Page 166 and 167: xSeries 382 Hard Disk Drive (HDD) S
Page 168 and 169: xSeries 382 Power and AccessoriesPa
Page 172 and 173: xSeries 445 Processor OptionsSBBNum
Page 174 and 175: Operating System InstanceRemoteI/OI
Page 176 and 177: ack of planar1 2 3 4 5 6 7 8 9 10 1
Page 178 and 179: Bay 1Bay 3xSeries 445 front viewBay
Page 180 and 181: 5. See Fibre Channel Solutions Over
Page 186 and 187: 1. xSeries 455 architecture optimiz
Page 188 and 189: xSeries 455 Hard Disk Drive (HDD) S
Page 190 and 191: PCI Slots 1- 6Reserved slot for sta
Page 194 and 195: RXE-100 Remote Expansion Enclosure
Page 196 and 197: Datacenter Solutions• Testing Ser
Page 198 and 199: xSeries 445 4 and 8-way Datacenter
Page 200 and 201: Select the followingOne per node24P
Page 202 and 203: 4816-ABX4816-ADX4816-CAX4816-CBX481
Page 204 and 205: xSeries 455 8-way Datacenter High A
Page 206 and 207: 32P0735 73.4GB 15K rpm Ultra320 SCS
Page 208 and 209: Services58P866358P8665Hardware Inte
Page 210 and 211: xSeries 445 16-way Datacenter Scala
Page 212 and 213: Rack-related930842S NetBAY42 Enterp
Page 214 and 215: xSeries 455 8-way Datacenter Scalab
Page 216 and 217: xSeries 455 Datacenter Scalable Off
Page 220 and 221: eServer 325 Memory OptionsSBB Numbe
Page 222 and 223: Bay Form Factor Height Front Access
Page 226 and 227: CD-ROMFDDBlade controlpanelFiller b
Page 228 and 229: 4. Mixing Ethernet (including Coppe
Page 230 and 231: BladeCenter Power and AccessoriesSB
Page 232 and 233:
Page 234 and 235:
BatteryControl panelconnector (J64)
Page 236 and 237:
HS20 I/O OptionsSBBNumberOptionNumb
Page 238 and 239:
HS40 Memory OptionsSBBNumberOptionN
Page 240 and 241:
Page 242 and 243:
JS20 I/O OptionsSBBNumberOptionNumb
Page 244 and 245:
VMware Offerings for BladeCenterThe
Page 246 and 247:
Options Supported in NOS PreloadsOp
Page 248 and 249:
Remote Deployment ManagerRemote rep
Page 250 and 251:
ARMTech 2.0 Active Resource Managem
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
24P8183 FAStT600 3rd EXP700 Attach
Page 258 and 259:
16. Upgrade to support four partiti
Page 260 and 261:
Page 262 and 263:
GFC HDDOUTINGEEGINABOUTFC HDDFC HDD
Page 264 and 265:
Supported Cable GroupsCable Group A
Page 266 and 267:
35601RUFibre ChannelConnectorsOUTIN
Page 268 and 269:
Page 270 and 271:
SFPSFPSFPSFPSFPSFPOUTINEEAOUTIN BFC
Page 272 and 273:
Page 274 and 275:
Fibre ChannelConnectorsOutInOutInLo
Page 276 and 277:
1.FC2-133 HostBus Adapter 1FC2-133
Page 278 and 279:
17421RUFAStT700 Fibre Channel S 4 -
Page 280 and 281:
11. The LC-SC Fibre Channel Adapter
Page 282 and 283:
FAStT200 HA Storage Server (P/N 354
Page 284 and 285:
Page 286 and 287:
NetBAY11StandardRackNetBAY25Standar
Page 288 and 289:
• When selecting length of power,
Page 290 and 291:
Rack OptionsOptionNumberDescription
Page 292 and 293:
9306-110(inches)9306-xxx(inches)930
Page 294 and 295:
3. IBM Advanced Connectivity Techno
Page 296 and 297:
Switch Placement RulesMounting Loca
Page 298 and 299:
Typical Rack Power ConfigurationsTy
Page 300 and 301:
Country-Specific Considerations: US
Page 302 and 303:
Country-Specific Considerations: Eu
Page 304 and 305:
Country-Specific Considerations: Ja
Page 306 and 307:
Rack PDU Power Cables1WallDevice2PD
Page 308 and 309:
DPI Three-phase 380-415V 32AHigh De
Page 310 and 311:
3581L28TotalStorage Ultrium LVD Tap
Page 312 and 313:
08L6517 133570 Adapter Card Kit HVD
Page 314 and 315:
Page 316 and 317:
TowerRack MountedINT’LP/NSU-700iN
Page 318 and 319:
1900 - - - - - - - 142000 - - - - -
Page 320 and 321:
1900 6.5 39.7 1 / 6 1 / 54 2 / 2420
Page 322 and 323:
Storage Unit35311RU35100203503B1X35
Page 324 and 325:
Page 326 and 327:
x345 - standard 9, 10 - 11, 12optio
Page 328 and 329:
Multiple hot-spare ASM focal points
Page 330 and 331:
1. Server with ASMP or ISMP and two
Page 332 and 333:
Page 334 and 335:
07P270116/4 Token-ring Low Profile
Page 336 and 337:
Page 338 and 339:
BladeCenter power overviewYour Blad
Page 340 and 341:
Upgrade calculationComplete the fol
Page 342 and 343:
Power worksheetsPower domain A work
Page 344 and 345:
Eleventh Edition (June 2004)IBM, Bl
Page 346 and 347:
Page 348 and 349:
This IBM equipment is subject to ap
show all

configuration and options guide - IBM Quicklinks

Create successful ePaper yourself

Delete template?

Save as template?