configuration and options guide - IBM Quicklinks

Refer to the Important Notices section for important notices4. Not supported in RXE-100 when connected to this system.5. See Fibre Channel Solutions Overview section for additional configuration information.6. xSeries 365 includes an integrated Broadcom 5704 10/100/1000 dual-port Ethernet controller (copper) with Wake on LAN support.7. Required to connect the standard Remote Supervisor Adapter II to an interconnect network with other servers for system management supportthrough a single LAN or modem connection.8. xSeries 365 supports a maximum of one RXE-100 per server. One RXE-100 can be shared between two x365 systems providing fail-over supportor capability to add up to six additional PCI slots per server.9. The Integrated xSeries Adapter for iSeries allows interconnectivity with an IBM eServer iSeries server. This card occupies two slot positions.RSA: standard Remote Supervisor AdapterSlot 1: Bus 0, 33MHz, 64-bit, full-length, 3.3v, Active-PCI (contains pre-installed RSA II)Slot 2: Bus 3, 100MHz, 64-bit, full-length, 3.3v, Active PCI-X for 100MHz or higher adaptersSlot 3: Bus 6, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 4: Bus 9, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XSlot 6: Bus F, 133MHz, 64-bit, full-length, 3.3v, Active-PCI-XScan sequence: Slot 1, 2, 3, 4, 5, 6Continuing in optional RXE-100: Slot 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18xSeries 365 rear viewChapter 18. xSeries 365 159