configuration and options guide - IBM Quicklinks

Chapter 32. External Storage Expansion Unit OverviewNamePart NumberStorage TypeHDD Bays (Std/Max)Hot-Swap HDD Bays (Y/N)Maximum Storage Capacity (GB)Dimensions (W x D x H)Form FactorMax Cfg WtPower SupplySCSI External Storage Expansion At-A-GlanceEXP400 11733(1RU, 2RX) 2Ultra320LVDS14/14 3Y 2,055.2 445mm x 552mm x 128mm(17.5in x 21.7in x 5in)Rack Drawer(3U) 438kg(85lbs)Dual 500w,Redundant 5Fibre Channel External Expansion At-A-GlanceFAStT200 35421RU FibreChannel10/10 Y 1,468 480mm x 575mm x 131.8mm(18.9in x 22.63in x 5.2in)Rack Drawer (3U)42.3kg(94lbs)Dual 350w,RedundantFAStT200HA35422RU 6FibreChannel10/10 Y 1,468 480mm x 575mm x 131.8mm(18.9in x 22.63in x 5.2in)Rack Drawer (3U)42.3kg(94lbs)Dual 350w,RedundantFAStT100 1724100 7SATA 14/14 Y 3500 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)40.2kg(57lbs)Dual 390w,RedundantFAStT600Entry 817226LUFibreChannel14/14 Y 2,055 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)41.04kg(90.48lbs)Single 390wFAStTEXP100 9171010U 10SATA 14/14 Y 3,500 481.8mm x 597.4mm x132.3mm (18.97in x 23.52in x5.21in)Rack Drawer (3U)40.2kg(57lbs)Dual 390w,RedundantFAStTEXP50035601RU 11FibreChannel310/10 Y 1,468 447mm x 563mm x 128mm(17.6in x 22.2in x 5in)Rack Drawer (3U)36.1kg(79.6lbs)Dual 350w,RedundantFAStT600 12172260UFibreChannel14/14 Y 2,055.2 481.8mm x 597.4mm x132.3mm(18.97in x 23.52in x 5.21in)Rack Drawer (3U)45.87kg(101.26lbs)Dual 390w,RedundantFAStTEXP70017401RU 13FibreChannel314/14 Y 2,055.2 482mm x 597mm x 132mm(18.97in x 23.52in x 5.21in)Rack Drawer (3U)41.47kg(91.42lbs)Dual 400w,RedundantNote: To attach a SCSI storage enclosure to an xSeries server, an appropriate RAID controller and external cable is required.See Appendix D: Cables - Storage Units - Controllers.1. Includes a single 2m Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each with its own power cord.2. EXP400 model 2RX is DC powered.3. EXP400 and FastT EXP700 support slim-line drives only. FAStT EXP500 supports either half-high or slim-line HDDs.4. A rack-to-tower conversion kit option (P/N 09N7296) is available.5. Two 500w power supplies are standard in models 1RU and 1RX only.6. Identical to FAStT200 (P/N 35421RU) with the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).7. FAStT100 ships with the railing mounting kit and two 2.8m/9ft intra-rack power cords (IEC 320-C13 to IEC 320-C14). If U.S. wall-outlet powercords are required, then order quantity two of 94G6667.8. Single RAID controller and single power supply. Upgradeable to FAStT600 or FAStT600 Turbo.9. Attachment to a FAStT600 Storage Server or FAStT900 Storage Server is required. This expansion unit does not attach directly to an xSeries server.See FAStT EXP100 section for more information.10. FAStT EXP100 ships with the rail mounting kit, two 2.8m/9ft intra-rack power cords (IEC 320-C13 to IEC 320-C14), and two U.S. power cords(IEC 320-C13 to NEMA 5-15P).11. Attachment to a FAStT500 Storage Server (P/N 35521RU) or FAStT700 Storage Server (P/N 17421RU) is required. This expansion unit does notattach directly to an xSeries server. See FAStT EXP500 section for more information.12. The FAStT600 can also be purchased with the FAStT600 Turbo Option installed, which significantly increases performance and scalability. Seethe ‘Fibre Channel Solutions Quickview’ for more information.13. Attachment to a FAStT700 Storage Server (P/N 17401RU) is required. This expansion unit does not attach directly to an xSeries server. SeeFAStT EXP700 section for more information.249