configuration and options guide - IBM Quicklinks

xSeries 455 8-way Datacenter High Availability Program 1OptionNumberDescriptionTotal Qty8-wayTotal Qty2-Node 8-wayUsageSelect one of the following8855-1AX8855-2AX8855-3AX2 x 1.3GHz/400MHz-3MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.4GHz/400MHz-4MB L3 Cache Itanium 2, openbay,CD-RW/DVD2 x 1.5GHz/400MHz-6MB L3 Cache Itanium 2, openbay,CD-RW/DVDScalability Kit2 42 42 473P9911 4-way to 8-way Scalability option 1 2 Allows two nodes to be connectedtogether providing an 8-way capableconfiguration. Includes two 2.5mmcables.Select one of the followingAll processors in the solution mustmatch.73P7076 1.3GHz/400MHz-3MB L3 Cache Itanium 2 Processor 4 873P7077 1.4GHz/400MHz-4MB L3 Cache Itanium 2 Processor 4 873P7078 1.5GHz/400MHz-6MB L3 Cache Itanium 2 Processor 4 8Select memory requiredSelect in matched pairs, up to 28 DIMMsper chassis.33L5038 512MB PC2100 ECC DDR RDIMM Min. of 2 -33L5039 1GB PC2100 ECC DDR RDIMM Min. of 2 -33L5040 2GB PC2100 ECC DDR RDIMM Min. of 2 -Select one of the following02R0988 ServeRAID-6M Controller (256MB Cache) 1 232P0033 ServeRAID-6M Controller (128MB Cache) 1 2Select HDD required Two HDDs per node required 232P0726 36.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0727 73.4GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0728 146.8GB 10K rpm Ultra320 SCSI Hot-swap HDD 2 432P0734 36.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 432P0735 73.4GB 15K rpm Ultra320 SCSI Hot-swap HDD 2 4Select the following24P0960 FC2-133 Host Bus Adapter 2 4 Two per node for load balancing andredundancy.Services06P7505 Image Load Fee 1 258P8663 Hardware Integration - Server (up to 3 options) AsRequired58P8665 Hardware Integration - Server (4 or more options) AsRequiredAs RequiredAs RequiredNote: A node represents a single instance of the operating system. For x455 Datacenter 8-way configurations, a node consists of twochassis.1. All final customer configurations and solutions require IBM Solution Assurance Approval.2. One of the two chassis in each “node” will contain two HDDs.The Datacenter High Availability Program includes the part numbers and quantities identified in this table.Additional options for Datacenter Solutions are listed in the table labeled “Selectable Options.”202 Configuration and Options Guide